View Full Version : Need a template or outline for 2x2 1/8 holes beside driver for remote controls

09-06-2004, 10:02 PM
I'm going to put in a radio remote control by the driver on the front of the armrest panel. In 03, some panels had pre-cut out holes. Does anyone have or can they make a template to show me where to line up these holes so I can drill them.
I'm also going to put in a depth finder in one of them.
Even if you only outline the gauges on a piece of paper then I can reduce the circles for the holes as long as I have the spacing and basic size of the panel area to start from.