PDA

View Full Version : 2004 x2 Reat seat over cooler


Texas Xtreme
07-12-2013, 09:16 PM
I am currently looking at a boat and it is missing the seat over the cooler. How hard is this going to be to find I found the thread about Jim the upholstery guy didn't want to call this late.
I will post a picture when I get my e-mail working.

JRW160
07-12-2013, 10:10 PM
Shouldn't be too bad. I could make you a template if you need one. Should cost $200-$300 to have one made.

Texas Xtreme
07-13-2013, 11:42 AM
Cool deal. Is this a problem that you have with your boat also?

Grant777
07-13-2013, 11:45 AM
The expensive option is to just call a Mastercraft dealer with your hull number and a picture of your interior. You'll get a new one in 8 weeks from the factory. Won't be cheap. I guess $400+.

wheelerd
07-13-2013, 11:51 AM
I am currently looking at a boat and it is missing the seat over the cooler. How hard is this going to be to find I found the thread about Jim the upholstery guy didn't want to call this late.
I will post a picture when I get my e-mail working.

Not sure what you mean by "seat over the cooler." My 05 has no cooler.

Texas Xtreme
07-13-2013, 01:21 PM
Here is a picture of the seat missing and once of the seat in another boat.

Texas Xtreme
07-13-2013, 01:58 PM
Called 2 dealers in Texas no go on 2006 and older upholstery.

wheelerd
07-13-2013, 03:24 PM
Here is a picture of the seat missing and once of the seat in another boat.

Ah, THAT part. I've never thot of that storage compartment being a cooler . . . but I guess you could put one in there.

JRW160
07-14-2013, 12:02 PM
Ah, THAT part. I've never thot of that storage compartment being a cooler . . . but I guess you could put one in there.
The black piece in the middle is insulated. I guess it's supposed to be a cooler, but the engine heats it up and melts the ice really quickly

Texas Xtreme
07-14-2013, 01:13 PM
Well I am driving 3 hours to look at it see if I take a boat back home or a check.

JRW160
07-14-2013, 01:31 PM
The expensive option is to just call a Mastercraft dealer with your hull number and a picture of your interior. You'll get a new one in 8 weeks from the factory. Won't be cheap. I guess $400+.
I think they can only go back 6 or 7 years on vinyl. I tried to get a bow filler cushion from the factory a couple of years ago and couldn't get one.

73blue
07-14-2013, 01:50 PM
The black piece in the middle is insulated. I guess it's supposed to be a cooler, but the engine heats it up and melts the ice really quickly


I'm pretty sure that insulation is for noise or heat suppression.

Grant777
07-14-2013, 03:56 PM
I think they can only go back 6 or 7 years on vinyl. I tried to get a bow filler cushion from the factory a couple of years ago and couldn't get one.

Perhaps. The bow filler I had made was for an '08.

Texas Xtreme
07-14-2013, 09:05 PM
Did not even get the boat was not worth the money he wanted imo. So back on the hunt.