PDA

View Full Version : Prop Tech


Shilohsho
07-11-2013, 08:11 PM
Do any of you know what application this would fit? A buddy of mine came across it.
It's a 4 blade prop with "644 13.25x16vr 1 1/8" in the center

The inside bore isn't splined, it uses a key.

j.mccreight@hotmail.com
07-11-2013, 08:34 PM
Do any of you know what application this would fit? A buddy of mine came across it.
It's a 4 blade prop with "644 13.25x16vr 1 1/8" in the center

The inside bore isn't splined, it uses a key.

a powerslot prop, aka gear reduction drive, 1.5:1 or possible 1.2:1 velvet drive ratios, is my best guess.