View Full Version : Factory Installed Ballast Issue

06-19-2013, 12:16 PM
2007 X45SS. Have new after market ballast in rear and upfront (KGB), both working fine. Factory ballast on Starboard side seems to be working. Factory ballast on Port side and big central KGB fills up, but is not emptying. The pumps go off after about 10-15 seconds. On top of the big front KGB factory tank there is a FILL/EMPTY connector, which is not connected to anything (same type as is on top of the fuel tank at the stern of the boat). Could that be causing an issue?
It is as if the ballast pumps for the factory Port and KGB think that the tanks are empty, and are switching themselves off.
Anyone have any great ideas what the solution could be?
Help appreciated. My boat is weighed down and tilted to the left!!
thanks in advance.