PDA

View Full Version : 1994 Era PS190 owners - Dimension Needed


88 PS190
06-16-2013, 10:27 PM
Hi folks.

I would like the dimension of a part from your trailer!

Essentially I need the width between the trailer guide poles at rub strip height.

My boat is sitting on a trailer that does not have them, and the math required to make sure that they are far enough apart that the wider section near the drivers helm can clear the posts with out damage is more than I currently feel like figuring out, at the same time I feel like the narrower the better, and MC probably had a good happy medium.

So for the love of all things MCOCD - can someone please measure this width so I can get my weld on?

Cloaked
06-16-2013, 10:46 PM
I have 86.25" (and not for any love of any OCD)....trix are for kids...

No undercut, porosity, lack of fusion, or cold lap....make it purrty....

.

88 PS190
06-17-2013, 12:48 AM
All of those things can be fixed with a grinder and spot putty! I hope to do a nice job, hate universals and u bolts.