PDA

View Full Version : WTB Bow Filler Cushion for '00 PS205


Longdrive
06-13-2013, 09:55 AM
Any leads would be greatly appreciated....Thanks

FlyHighorDie
06-13-2013, 11:14 AM
now sure if the dimensions are the same. Saw this in Spokane's CC
http://spokane.craigslist.org/boa/3838055463.html

Longdrive
06-13-2013, 11:25 AM
Thanks Fly but that's not going to work. X1 maybe but not a 15.

JRW160
06-13-2013, 03:54 PM
I looked for one for a while but could never find one. I made a cardboard template and took it to a local vinyl shop and had them make me one. It cost me $75. For the support I cut out a piece of 1/2" hpde. I paid $50 or so for it.

Longdrive
06-13-2013, 03:59 PM
JRW I fear you're right. I'll give it a bit then start making. Thanks for the tip.

Sent from my HTC One using Tapatalk 2

JRW160
06-13-2013, 04:03 PM
Good luck. Here's what my support and cushion look like. The cushion is soft on both sides. It has a zipper on the back to stuff the cushion inside.

https://lh4.googleusercontent.com/-xOal8USSE3E/T0lsmG4WuFI/AAAAAAAAp_w/Wjl-ANsK8F0/s640/IMG_20120225_160037.jpg

https://lh5.googleusercontent.com/-KPVqb8c28-8/TzXNE1oEa8I/AAAAAAAAp7w/nHAg_nGIAbo/s640/IMG_20120210_200550.jpg

Longdrive
06-13-2013, 05:45 PM
Nice job that looks sweet. I guess I'll start looking for a vinyl guy. thanks for the visual.


Sent from my HTC One using Tapatalk 2

SP Maristar
06-13-2013, 05:57 PM
I looked for one for a while but could never find one. I made a cardboard template and took it to a local vinyl shop and had them make me one. It cost me $75. For the support I cut out a piece of 1/2" hpde. I paid $50 or so for it.

Where did you buy your HDPE?

Longdrive
06-13-2013, 05:58 PM
There is plenty on eBay.

Sent from my HTC One using Tapatalk 2

JRW160
06-13-2013, 10:54 PM
Where did you buy your HDPE?
I got it from plastec profiles 717-593-9200. A friend of mine bought some off ebay from them, so I just called them up and got it a little cheaper.