PDA

View Full Version : Mastercraft badge logo sticker


Beg4wake
05-21-2013, 09:27 AM
Can anybody give me the name of a specific decal shop where I can order a set of stickers like the one on the front bottom side of the bow in this pic. I want 2 in yellow...

nickespi
05-21-2013, 09:41 AM
Here is the file for it. https://www.dropbox.com/sh/o91j4vsfromgu2x/r0N1CR5VtR

Just take that file to your local sign shop.

ZachDaddy
05-21-2013, 09:47 AM
+ one. I too would like one in red

DBrown2
05-21-2013, 10:53 AM
I used Nick's efforts, took to local sign shop... and within a Day was set to go.

Traxx822
05-21-2013, 11:02 AM
Bookmarked, thanks.

LaRue
05-21-2013, 11:05 AM
how do you download just one file? Do i need to download entire dropbox file? I am looking to print the the blue and grey Shield label

nickespi
05-21-2013, 11:56 AM
I can't take credit for any of that. I just happened to have the link already opened on my phone when I came across the post. Looking to get some made for the boat an truck.

scott023
05-21-2013, 01:31 PM
Ok, I must be blind. Where is the shield decal in that file?

LaRue
05-21-2013, 02:48 PM
when i open dropbox it is in the sixth row from the top.

Still don't understand how to download single file....???

scott023
05-21-2013, 03:08 PM
when i open dropbox it is in the sixth row from the top.

Still don't understand how to download single file....???

Hmmmm, that's an eps file that won't open for me. Darn it.

brucemac
05-21-2013, 08:52 PM
encapsulated postscript scooter. there are free viewers available online and any sign shop will be able to open/work with it.

mikeg205
05-21-2013, 09:03 PM
Larue, give me the file name and I will email you.. I also put a few new ones in a folder called shields

mikeg205
05-21-2013, 09:04 PM
Traxx - who dropbox do you think that is.. ;)

LaRue
05-21-2013, 10:58 PM
Larue, give me the file name and I will email you.. I also put a few new ones in a folder called shields

MC Shield Gray Blue.ai.ai.

Thanks

j.mccreight@hotmail.com
05-21-2013, 11:48 PM
this one? you could save it then take the file to a shop and have it made in what ever color you want. The one on right is the one I think your looking for.

mikeg205
05-21-2013, 11:52 PM
don't forget this one.. ;) - my newest creation - Traxxx was the muse... ;) - I was goofing around with one for us who use fly hi poles - but it wasn't family friendly... ;)

thatsmrmastercraft
05-21-2013, 11:57 PM
don't forget this one.. ;) - my newest creation - Traxxx was the muse... ;) - I was goofing around with one for us who use fly hi poles - but it wasn't family friendly... ;)

Now that is cool!

Beg4wake
05-22-2013, 09:53 AM
Same here scott...I'm hoping I can just go to a sign shop though, have them bring up this thread and see if they can open it there!

mikeg205
05-22-2013, 10:23 AM
To down load dropbox - click on the file you want and then it will come up the click on the 3 dots to get download menu.

Coffeyman76
05-22-2013, 10:34 AM
What is the factory "size" for this badge?

Thanks

rgardjr1
05-23-2013, 09:19 PM
Made a new sweatshirt on my lunch today and cut a sticker for the boat too. 95502


Sent from my iPhone using Tapatalk

mikeg205
05-23-2013, 09:49 PM
Made a new sweatshirt on my lunch today and cut a sticker for the boat too. 95502


Sent from my iPhone using Tapatalk

what media did you use and did you make the art?

rgardjr1
05-23-2013, 11:14 PM
what media did you use and did you make the art?

It's heat transfer vinyl. The black layer has a carbon fiber texture. I manually traced the shield logo in Inkscape. I might have been able to use one of the files that have been posted to the Dropbox account, but I knew I wanted to do the solid background so I just customized a version for that.

thatsmrmastercraft
05-23-2013, 11:16 PM
Made a new sweatshirt on my lunch today and cut a sticker for the boat too. 95502


Sent from my iPhone using Tapatalk

Very cool. :cool:

rgardjr1
05-24-2013, 12:02 AM
Very cool. :cool:

Thanks. On the front I just tweaked the Century Gothic font to make it taller. I think it looks pretty nice. I'll get a pic of the boat decal if I get it put on this weekend.
95507


Sent from my iPhone using Tapatalk

DemolitionMan
05-24-2013, 12:40 AM
Does anyone have the 40th logo in pdf?

clrussell
05-24-2013, 07:24 AM
Subscribed, thanks!


Tapatalk

mikeg205
05-24-2013, 07:38 AM
Does anyone have the 40th logo in pdf?

post up a pic.

j.mccreight@hotmail.com
05-24-2013, 08:10 AM
40th logo.

Double D
05-24-2013, 08:23 AM
Thanks. On the front I just tweaked the Century Gothic font to make it taller. I think it looks pretty nice. I'll get a pic of the boat decal if I get it put on this weekend.
95507


Sent from my iPhone using Tapatalk

Very cool!! If you wanted to use a similar font to the MC font its called Hemi Head 426. I had my Registration numbers made in that font.

mikeg205
05-24-2013, 08:55 AM
40th logo.

that's cool looking - not too hard to draw... drawing projects stacking up for off-season...

rgardjr1
05-26-2013, 04:41 PM
Here is the one I did for my boat:95622


Sent from my iPhone using Tapatalk

BrooksfamX2
05-26-2013, 09:04 PM
Here is the one I did for my boat:95622


Sent from my iPhone using Tapatalk


I need 2 like that........;)

mikeg205
05-27-2013, 12:59 AM
Here is the one I did for my boat:95622


Sent from my iPhone using Tapatalk

nice!!

jj4smith
06-01-2013, 09:45 PM
Anybody willing to cut me a set of plain white 50" mc decals?

holms
06-05-2013, 11:14 PM
how big are those badges under the front? " 's

CBRENT
06-06-2013, 10:27 AM
@ holms - I asked that question on MC Facebook page about the PWT graphic and they said, "Guesstimate: 12" across". I have a 2012 X2 so I might make mine around 10" across. 12" might be too big.

mikeg205
06-06-2013, 10:36 AM
probably too small at 12 inches... it looks bigger - it almost looks a third of the half beam width in the picture... make sure you use an edge seal pen to make sure it doesn't peel up in one season... that decal will take a lot of pounding there...

CBRENT
06-06-2013, 10:38 AM
@ rgardjr1 - What boat is that and how big did you print the shield?

Thanks.

rgardjr1
06-09-2013, 11:08 AM
@ rgardjr1 - What boat is that and how big did you print the shield?

Thanks.

Width at top 11 1/2" (widest)
Width of most of the shield 11"
Height at center 12"'(tallest)
Boat is an X-2
This should get you in the ball park. The size I cut mine was mainly determined by the size of the vinyl I had. I didn't have my boat around so I guessed at what would look right.


Sent from my iPhone using Tapatalk

XStar08
07-07-2013, 03:18 PM
also did one, choose to go with a carbon optic (and feel since it was made from special car wrapping stuff)...

sorry, no file upload possible at the moment!

SILENTxNOISE
07-07-2013, 11:33 PM
I'd like to see what this would look like on an X2 sitting in the water..

Just a simple request.. Anyone? :)

ttu
08-25-2013, 10:00 PM
Here is the one I did for my boat:95622


Sent from my iPhone using Tapatalk

is there anyone who can make me a turn bouy orange one for my X2. just let me know and I have no issue paying for it.

M3lelena
08-28-2013, 08:47 AM
Hi All,

just bought a 13 Xstar from the US and i wanted to get a few decals for my towing vehicule. I downloaded the files from dropbox and made my own colors but unfortunately there are no shops able to do it where i live ( Madagascar). is anyone kind enough to share a link to a online shop or take it to his local shop and ship it to me (paypal friendly) ? thanks :)

Ironhorse
08-28-2013, 09:10 AM
This would look great on my garage wall if someone is making them.

ttu
08-28-2013, 08:28 PM
anyone have access to making a orange one for me. will pay!

thanks!

mikeg205
08-28-2013, 10:28 PM
Anyone who wants a decal or two PM with size and colors - I can make them - I only charge for transfer tape, shipping tubes or box (cost) and what it costs to ship them.

Nick911
08-28-2013, 10:57 PM
anyone have access to making a orange one for me. will pay!

thanks!

You find someone to do one? I'd take on too in a white with navy outline and will pay.

clrussell
08-28-2013, 11:02 PM
Mike I sent ya a pm

thatsmrmastercraft
08-29-2013, 01:26 AM
I can attest to the fact that Mike does fine work.

mikeg205
08-30-2013, 08:56 AM
Thanks for all the requests... I hope to make some this Tuesday - Wednesday I will post up the finished products then... Have a great labor day all.

M3lelena
11-01-2013, 10:46 AM
got my decals a while ago but was out of the country..tryed to install them today on my towing vehicule..here is the result...out of 4 i manage to fk 3 of them..now i need some more..but def like em a lot..thanks to Mike!

http://img13.imageshack.us/img13/2595/lxeh.jpg

http://img600.imageshack.us/img600/4962/lkrp.jpg

g-mantrix
11-26-2013, 01:49 AM
Just fitted On my 07 X2http://img.tapatalk.com/d/13/11/26/egyzu5u6.jpg

blflak
01-17-2014, 07:44 PM
Been working on a shield and crest for a new design for the boat. So far this is what i have...

What needs to be done to make it better...?

atihanyi
01-17-2014, 07:48 PM
um- cant open your attachment

blflak
01-17-2014, 07:52 PM
um- cant open your attachment

fixed

mikeg205
01-17-2014, 07:55 PM
Been working on a shield and crest for a new design for the boat. So far this is what i have...

https://www.dropbox.com/s/1wbfagmihme1331/MC-Shield-Crest.jpg

What needs to be done to make it better...?

something looks to be a bit off... IMO - bring the shield forward maybe? small stroke on the cresting? or bring the cresting closer to the shield?

atihanyi
01-17-2014, 07:58 PM
What about turning the crest at the bottom into wings or even an entire eagle with outstretched talons?

blflak
01-17-2014, 08:00 PM
something looks to be a bit off... IMO - bring the shield forward maybe? small stroke on the cresting? or bring the cresting closer to the shield?

I am going to have it solid because its going to be a chrome on chrome look.. similar to the image on the bottom

mikeg205
01-17-2014, 08:02 PM
I am going to have it solid because its going to be a chrome on chrome look.. similar to the image on the bottom

cool - will you want to share your work to the decal dropbox?

blflak
01-17-2014, 08:04 PM
cool - will you want to share your work to the decal dropbox?

Yea sure, let me know if you want the .psd i have it in layers...

mikeg205
01-17-2014, 08:05 PM
sure - email it to mgorczak@mutoh.com and I will put it in there...