PDA

View Full Version : Team Mastercraft Stickers


D3skier
05-07-2013, 09:42 PM
ok.... so I swiped my wife's pazzles machine and started playing around with it. first thing I did was make some door magnets for the new tennis shop in town then found an old mastercraft sticker I stuck on paper "just in case" and low and behold started playing with it and popped these out within a few hours.

94613


94614

Double D
05-07-2013, 10:43 PM
Stickers? How can I get some blue ones??

D3skier
05-07-2013, 10:59 PM
Stickers? How can I get some blue ones??

me finding some blue vinyl

Double D
05-07-2013, 11:01 PM
me finding some blue vinyl

Hmmmm.......

D3skier
05-07-2013, 11:13 PM
Hmmmm.......

actually just checked wife's supply and found a medium blue forest green and burgundy ...

carlsonwa
05-07-2013, 11:27 PM
I would buy some white lettering ones.


Sent from my iPad using Tapatalk

mikeg205
05-08-2013, 12:10 AM
Did you draw the "team" in illustrator? I mine looks like this...

D3skier
05-08-2013, 12:20 AM
how's this color blue? it's actually a little darker than this but the flash brightened it up some it's more of a medium blue

94659

D3skier
05-08-2013, 12:23 AM
Did you draw the "team" in illustrator? I mine looks like this...

no... it was from an actual sticker I got from Mastercraft back in 04-06

Rockman
05-08-2013, 12:33 AM
how's this color blue? it's actually a little darker than this but the flash brightened it up some it's more of a medium blue

94659

The blue looks like it will match my 190 perfectly!:D

Double D
05-08-2013, 12:36 AM
how's this color blue? it's actually a little darker than this but the flash brightened it up some it's more of a medium blue

94659

Looks great!! How much? Trying to decide how many I would want. How many for four smaller ones?

D3skier
05-08-2013, 12:49 AM
Looks great!! How much? Trying to decide how many I would want. How many for four smaller ones?

you don't want one of the big one's too?

mikeg205
05-08-2013, 08:43 AM
no... it was from an actual sticker I got from Mastercraft back in 04-06

So you just scanned it and imported into the pazzles softeware and started cutting - cool.

That's a nice cutter - it does alot for not a big cash lay out.

Rockman
05-08-2013, 08:50 AM
you don't want one of the big one's too?

I would like one of the big stickers! How much are you charging?:D

Double D
05-08-2013, 09:02 AM
you don't want one of the big one's too?

Well, not sure what I would do with it, plus I didn't want to hog them all.... :rolleyes:

onejdgreen
05-08-2013, 09:34 AM
Looks like you have some red ones??? :D I would be more than willing to take some of those off your hands...

D3skier
05-08-2013, 09:48 AM
not sure on pricing yet.
I think what I'm going to do just to err on the safe side is since double d responded first I've made him the test subject for this project. I'm sending him his stickers and all depending on his response will make the decision to move forward with if these will be available. Keep the responses coming for who wants what and we'll go from there

02ProstarSammyD
05-08-2013, 09:52 AM
Not gonna lie. If you get any yellow or black I'd like to hop up on that

nickespi
05-08-2013, 09:59 AM
I'd go for some black ones or maybe white.

D3skier
05-08-2013, 10:04 AM
Not gonna lie. If you get any yellow or black I'd like to hop up on that

already have black ones printed and if demand is good enough could really do any color wanted

02ProstarSammyD
05-08-2013, 10:07 AM
I'd go for some black ones or maybe white.

must resist comments. must resist comments. must resist comments

nickespi
05-08-2013, 12:33 PM
must resist comments. must resist comments. must resist comments

You should have seen my original comment before I quickly edited it hahaha

thatsmrmastercraft
05-08-2013, 12:38 PM
:popcorn::popcorn::popcorn:

Stritt
05-08-2013, 11:10 PM
Count me in on forest green. When you decide of course.

D3skier
05-09-2013, 04:33 PM
must resist comments. must resist comments. must resist comments

do you still want the black stickers? Just waiting for your info to send them out...

captain planet
05-09-2013, 05:09 PM
not sure on pricing yet.
I think what I'm going to do just to err on the safe side is since double d responded first I've made him the test subject for this project. I'm sending him his stickers and all depending on his response will make the decision to move forward with if these will be available. Keep the responses coming for who wants what and we'll go from there

Awww, c'mon. His brother has a nautique for crying-out-loud. Send them to me instead! 8p

Double D, you will have to let me see the blue ones so see how they match my boat.

I'd go for a couple white ones as well.

aquaman
05-09-2013, 05:10 PM
I'd like 2 small stickers in navy or dark blue if available ?

D3skier
05-09-2013, 05:16 PM
looks like white is going to be a popular color of choice. All I have right now is a flat white so I'll have to go get some new vinyl to make these and will move forward once I have a large enough order to get it

JDC
05-09-2013, 05:23 PM
I'd be in for two of the small gloss white ones.

mikeg205
05-09-2013, 05:32 PM
you're gonna need a new cutter with this volume of interest... ;)

D3skier
05-09-2013, 05:38 PM
you're gonna need a new cutter with this volume of interest... ;)

ok by me.... I'd like to be able to move a minimum of 1500 stickers
almost thinking about posting them on fleabay as well

BARE5
05-09-2013, 06:03 PM
Make a minimum for ordering. That'll eat 1500 decals quickly.

TxsRiverRat
05-09-2013, 06:32 PM
oh lord, licensing nightmare, coming up...

:popcorn::popcorn:

pmkkdx
05-09-2013, 06:39 PM
oh lord, licensing nightmare, coming up...

:popcorn::popcorn:

I was thinking the same thing ... is that not a registered trademark © ®™ ???

Rockman
05-09-2013, 10:09 PM
oh lord, licensing nightmare, coming up...

:popcorn::popcorn:

These stickers should be available to buy thru MC...Last time I saw a Team Mastercraft for sale was about 10 years ago. What gives!?

Funny how everyone wants stickers but the only ones available are really generic or the kits for a boat...or are super expensive. :rolleyes:

Especially for ones that are no longer available to buy from MC...any sign shop should have the ability to kake these then...:cool:

Ironhorse
05-10-2013, 09:17 AM
Not gonna lie. If you get any yellow or black I'd like to hop up on that

Yellow as well!

Double D
05-10-2013, 09:43 AM
already have black ones printed and if demand is good enough could really do any color wanted

I know MGBoyd25 might take some Yellow ones as well.

mikeg205
05-10-2013, 07:57 PM
You're not supposed to sell licensed product for MC without permission. If you use art that you make or find to refurb that's different.. Just about anyone can take the time to draw these decals - I don't think it will be an issue - since these will be promoting the brand... :)

Another reason I don't sell my decals... :) --- and made the link with all the decal art.

Double D
05-15-2013, 07:53 PM
I got my stickers D3skier and they look good. They are not the exact same size or thickness of the original sticker (see first picture) but they look the same and stick fine.

The only issue I see with colors is you need to find the correct contrast surface. I'm not the kind of guy to put these on my Gel so this one went on the window. I have a Black trailer so I would need a Raspberry or white to contrast and be seen.

Worth the purchase IMO.

D3skier
05-15-2013, 09:45 PM
ok guys... Double D said we're good to go!!! send your orders

D3skier
05-15-2013, 11:00 PM
who still wants stickers?

JDC
05-15-2013, 11:35 PM
who still wants stickers?
I'd like 2 white ones.
PM sent.

captain planet
05-16-2013, 08:11 AM
who still wants stickers?

How much?..

pmkkdx
05-16-2013, 09:37 AM
How much?..

^what CP said? and what colors are available? I would really like a deep purple but know that would likely be a minority ... but white would be second choice...

D3skier
05-16-2013, 09:54 AM
^what CP said? and what colors are available? I would really like a deep purple but know that would likely be a minority ... but white would be second choice...

you're in luck I have a small piece of purple. I can do a max of 4-5 small ones and 1 large one in purple. Need to go pick up some different white vinyl. I have flat white but don't really care for it so going to get some new stock soon.

dfski
05-16-2013, 10:00 AM
Interested in white maybe black. How much

Stritt
05-16-2013, 10:17 AM
6 small polo green....Depending on price.

onejdgreen
05-16-2013, 10:17 AM
who still wants stickers?

I'll take some, red and/or white. Whats your pricing?

Double D
05-16-2013, 10:47 AM
I'm gonna take some additional small white ones off your hands. I will PM or e-mail you what I want. Thanks!!

nickespi
05-16-2013, 11:02 AM
I'm interested in some white ones.

Romaswake
05-16-2013, 11:48 AM
I would love to get some of those They great!

Cary K.
05-16-2013, 11:59 AM
I am interested in several in white, also dependant upon price.

eileenb
05-16-2013, 01:05 PM
wow- that is really cool!

D3skier
05-17-2013, 01:30 PM
Hey pmkkdx how's this for purple? printed and ready to go when you are

95133

pmkkdx
05-17-2013, 02:29 PM
looks good! I totally zoned out by the time I got home last night and didn't get the check in the mail box for today. Should get it done this evening (if I get home before dark thirty).

D3skier
05-17-2013, 02:43 PM
I'm going to the supplier on Monday to pick up more vinyl so seems like white is a given but since this rolled no one has really committed to buying... what colors you guys want?

D3skier
05-17-2013, 11:51 PM
going to be gone most the weekend for a tennis tournament... so post your colors so I know what to pick up next week.....

Flatwaterfooter
05-18-2013, 12:43 AM
What's the cost?

Kyle
05-18-2013, 03:33 AM
Sorry but I had to post this.

95168
95169

I have a few polo shirts, & a couple of jackets.

When mcbd started making the gangster t shirts and other non cool hoodies, I took matters into my own hands. I had to have something a little nicer than a screen printed tshirt.

Coffeyman76
05-18-2013, 09:38 AM
Interested in white (2). What is the cost? Thanks

D3skier
05-18-2013, 11:31 AM
$4 for 1
$14 for 4
$17 for 5
$7 for large sticker

Flatwaterfooter
05-18-2013, 11:25 PM
What size are the bigger ones and how do we order

D3skier
05-18-2013, 11:43 PM
What size are the bigger ones and how do we order

the larger ones are 2 1/2 inches tall
payments can be made either by paypal or sending a check

D3skier
05-20-2013, 03:57 PM
you're gonna need a new cutter with this volume of interest... ;)
so much for needing a new cutter....


so no one seems to be wanting to pull the trigger on these now even with all the interest shown so I guess at this point I'm going to just pull this and kill the idea.

still going to the supplier to get some vinyl but he wasn't available today so going tomorrow to pick up the vinyl

going once

JDC
05-20-2013, 04:25 PM
I said in a PM I'd take 2 small white gloss decals when you get them ready... just let me know.

Now if you only have interest for a few, I'll understand and not be mad if you don't do them.

Thanks,

Double D
05-20-2013, 05:01 PM
so much for needing a new cutter....


so no one seems to be wanting to pull the trigger on these now even with all the interest shown so I guess at this point I'm going to just pull this and kill the idea.

still going to the supplier to get some vinyl but he wasn't available today so going tomorrow to pick up the vinyl

going once

Interest died why? They didn't like the pricing?

I still need two regular sized white ones please. Let me know when you have them ready and I will paypal you.

onejdgreen
05-20-2013, 05:04 PM
so much for needing a new cutter....


so no one seems to be wanting to pull the trigger on these now even with all the interest shown so I guess at this point I'm going to just pull this and kill the idea.

still going to the supplier to get some vinyl but he wasn't available today so going tomorrow to pick up the vinyl

going once

I am interested! Actually I want some! It looks like from previous picks that you can get one big one and 7 littler ones on a sheet? Is that right? If so, what do you want for a sheet of them in white?

D3skier
05-20-2013, 05:11 PM
Interest died why? They didn't like the pricing?

I still need two regular sized white ones please. Let me know when you have them ready and I will paypal you.

I don't know why... a few have sent checks just waiting for them to arrive but beyond that... no others

pmkkdx
05-20-2013, 11:56 PM
my check mailed out on Sat. from central TX ... up to the USPS now.

D3skier
05-20-2013, 11:58 PM
my check mailed out on Sat. from central TX ... up to the USPS now.

Your stickers are packaged and ready to go....

D3skier
05-21-2013, 04:12 PM
first batch of white ones completed who wants?

95330

colors now available are white, blue, red, yellow, teal
stay tuned.. once I get a bunch of white ones done I'm going to start making something different you guys might like

Double D
05-21-2013, 04:21 PM
first batch of white ones completed who wants?

95330

colors now available are white, blue, red, yellow, teal
stay tuned.. once I get a bunch of white ones done I'm going to start making something different you guys might like

I got dibs on two of those!!

D3skier
05-21-2013, 04:26 PM
I got dibs on two of those!!

so you want two sheets of these? ok I'll get them mailed out tonight

Double D
05-21-2013, 04:29 PM
so you want two sheets of these? ok I'll get them mailed out tonight

LOL! Only need two regular sized stickers right now. Since I have the blue ones already I just need the two single white ones...

D3skier
05-21-2013, 04:30 PM
LOL! Only need two regular sized stickers right now. Since I have the blue ones already I just need the two single white ones...

on their way... thx

Double D
05-21-2013, 05:25 PM
on their way... thx

Thanks!!

JDC
05-21-2013, 06:14 PM
first batch of white ones completed who wants?

$ sent.

Thanks,

D3skier
05-21-2013, 08:01 PM
red anyone?

95336

mikeg205
05-21-2013, 08:05 PM
it's fun making decals isn't it... :)

D3skier
05-21-2013, 08:39 PM
it's fun making decals isn't it... :)

to a point.... I'm really limited due to the size of this little machine. I can only do 12" x 12" so all depending on where this goes I might buy a cheapo vinyl cutter. What would you suggest for under 500 bucks. Would like something with at least a 30" cut width

mikeg205
05-21-2013, 08:48 PM
it's going to be tough to stay under or around $500 for 30".

D3skier
05-21-2013, 08:52 PM
what are your thoughts on this one?
they have it listed on eBay for $539 with free shipping
http://www.uscutter.com/USCutter-LaserPoint-II-Vinyl-Cutter-w-Sure-Cuts-A-Lot-Pro-Design-Cut-Software

pmkkdx
05-22-2013, 12:01 AM
dang! My wife might go for a red or white one... guess I will see how she likes the purple one on my truck when those come in.

mikeg205
05-22-2013, 12:20 AM
what are your thoughts on this one?
they have it listed on eBay for $539 with free shipping
http://www.uscutter.com/USCutter-LaserPoint-II-Vinyl-Cutter-w-Sure-Cuts-A-Lot-Pro-Design-Cut-Software

You usually get what you pay for.... let me check with my cutter expert... he works for graphtec.

How good are your design, mod or copy skills... ? which design software do you have?

These guys carry pretty decent stuff - they will be at a show in indianpolis NMB 2013 -

http://thenbmshow.com/indianapolis-2013

this is a sweet device - http://www.rolanddga.com/products/printcut/bn/

I wish my company made one...



mike

D3skier
05-22-2013, 12:23 AM
You usually get what you pay for.... let me check with my cutter expert... he works for graphtec.

How good are your design, mod or copy skills... ? which design software do you have?

These guys carry pretty decent stuff - they will be at a show in indianpolis NMB 2013 -

http://thenbmshow.com/indianapolis-2013

this is a sweet device - http://www.rolanddga.com/products/printcut/bn/

I wish my company made one...



mike

mod/copy skills are decent. I have CS5 master suite and used AI to create the vector file then pulled it in to the crappy software for the pazzles machine.

mikeg205
05-22-2013, 12:33 AM
I use CS5 as well - this is a great starter package - $20K but your in the vinyl biz for $20K... this is one of my dealers.. you can look for used printers but they are always a crap shoot... when I get a reply on the cutters. I'll let ya know.. a good cutter will do reflective media - that you can sell for big $$$.

D3skier
05-23-2013, 11:13 AM
latest creations

95458

D3skier
05-23-2013, 10:43 PM
got a set of yellow ones done today if anyone is still interested...

Fletchx7
05-24-2013, 08:59 AM
I'll take a couple yellow ones! Might as add 4 white to that mix too. What's easier for you....check or Pay Pal?

D3skier
05-24-2013, 09:48 AM
I'll take a couple yellow ones! Might as add 4 white to that mix too. What's easier for you....check or Pay Pal?

PM sent

Fletchx7
05-24-2013, 10:01 AM
Replied
Sent $$ via PP

D3skier
05-30-2013, 06:14 PM
ok got a crazy thought last night but was too dark already so had to wait until this morning to grab the picture....
95850

and here's the results
95851

thatsmrmastercraft
05-30-2013, 06:48 PM
ok got a crazy thought last night but was too dark already so had to wait until this morning to grab the picture....
95850

and here's the results
95851http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=95851&d=1369948361

Nice........

D3skier
05-31-2013, 10:53 AM
has everyone received their stickers?

I seem to be getting out of control here... does this qualify as MCOCD? Bad part is I don't even have a boat anymore....

95868

Fletchx7
05-31-2013, 10:59 AM
I received mine and love the yellow ones!! I may have another order for you after this weekend.
Thanks!

D3skier
05-31-2013, 11:03 AM
I received mine and love the yellow ones!! I may have another order for you after this weekend.
Thanks!

post up some pictures of where you used them... thx

Double D
05-31-2013, 11:07 AM
ok got a crazy thought last night but was too dark already so had to wait until this morning to grab the picture....
95850

and here's the results
95851

D3, I like this!! Trying to figure out where to put it. Whats your cost on these?

Also, I also did receive my extra white ones. Put the one on the trailer where its been missing since 2003.

Thanks!

D3skier
05-31-2013, 11:37 AM
D3, I like this!! Trying to figure out where to put it. Whats your cost on these?

Also, I also did receive my extra white ones. Put the one on the trailer where its been missing since 2003.

Thanks!

these are 7.50 ea but can do them in a solid color for 4

onejdgreen
05-31-2013, 05:47 PM
has everyone received their stickers?

I seem to be getting out of control here... does this qualify as MCOCD? Bad part is I don't even have a boat anymore....

95868

Not yet, did you receive my check?

D3skier
05-31-2013, 06:07 PM
Not yet, did you receive my check?

for J. Waldstein? I received the check either yesterday or Wed and mailed them out the same day

gsxrjtt
05-31-2013, 06:16 PM
D3 .... How much for the master with the star also 2 white team logos send me a pm

D3skier
05-31-2013, 06:28 PM
D3 .... How much for the master with the star also 2 white team logos send me a pm

PM sent

D3skier
05-31-2013, 06:52 PM
another new design as requested by DoubleD... $4 ea
95896

onejdgreen
05-31-2013, 07:57 PM
for J. Waldstein? I received the check either yesterday or Wed and mailed them out the same day

10-4 that's the one. I'll keep my out for them...

Fletchx7
06-03-2013, 09:17 AM
Here you go D3! They look great! No shots of the white ones yet.

pmkkdx
06-03-2013, 11:51 AM
received mine as well ... The large one was too tall to fit where I wanted to put it on my truck, so I merely cut off the "Team" portion. The wife even liked the look of the purple but without the "team" included and we put one of the smaller ones on her 4Runner (no pic yet)...

D3skier
06-04-2013, 11:46 AM
lookin' good!!!

HRC
06-05-2013, 10:34 PM
$4 for 1
$14 for 4
$17 for 5
$7 for large sticker

How much for a whole sheet of white? I have a friend that I'm sure I could share with.

D3skier
06-05-2013, 10:51 PM
How much for a whole sheet of white? I have a friend that I'm sure I could share with.

which ones are you wanting? there are a few designs now?

mikeg205
06-05-2013, 11:05 PM
Here's one for you to make D3 - for the better halves...lol

mpwonka
06-05-2013, 11:41 PM
How about yellow ??? VERY INTERESTED

D3skier
06-06-2013, 12:07 AM
Here's one for you to make D3 - for the better halves...lol
96232


How about yellow ??? VERY INTERESTED

serious?!

thatsmrmastercraft
06-06-2013, 02:07 AM
Here's one for you to make D3 - for the better halves...lolhttp://www.mastercraft.com/teamtalk/attachment.php?attachmentid=96232&d=1370488099

Lots of rain in IL leaves Mike with too much free time.:rolleyes:

HRC
06-06-2013, 11:09 AM
which ones are you wanting? there are a few designs now?

The original like in post #71 on page 8.

D3skier
06-06-2013, 11:13 AM
The original like in post #71 on page 8.

PM sent with price

mikeg205
06-06-2013, 11:26 AM
Hey D3 - i will send you the art for the tattoo if someone wants it... an idea I had was cut it out of paint mask and use tattoo air brush paint for a temp tattoo... lol

mikeg205
06-06-2013, 11:26 AM
Lots of rain in IL leaves Mike with too much free time.:rolleyes:

that's so the truth.... :( rain again today...almost ready to get swing away tongue installed to save the 30 minutes on pulling and putting away boat in garage...

thatsmrmastercraft
06-06-2013, 11:53 AM
that's so the truth.... :( rain again today...almost ready to get swing away tongue installed to save the 30 minutes on pulling and putting away boat in garage...

Making the boat more accessible is a good thing, though custom wheels sure do look nice:rolleyes:

We actually have a few days without rain in the forecast.

http://kstp.com/kstpimages/wx/web_7day.jpg

mikeg205
06-06-2013, 12:14 PM
I am out next week - no holes barred... Monday work all day - but have the evening... :) same for tuesday... :)

D3skier
06-07-2013, 12:39 AM
I'm working on putting things together to find a boat hopefully before the end of summer. Really want another MC but any of the top 3 would suffice.

D3skier
06-08-2013, 01:50 AM
was bored tonight so figured I'd try some in navy blue
96339

LGP
06-08-2013, 02:25 AM
Do you have stickers or decals for my trailer? I believe something between 2-3 inches in height would work. Just looking for Master Craft in white. Many thanks.

D3skier
06-08-2013, 02:32 AM
unfortunately I don't have the capacity to make them that big due to the size restrictions with my machine. about the closest I could get would be about 1 1/4 tall

D3skier
06-10-2013, 12:23 PM
96452
design 1
96453
design 2
96455
design 3
96454
design 4

D3skier
06-12-2013, 10:52 AM
new decal as requested
96622

Double D
06-12-2013, 04:38 PM
new decal as requested
96622

Very Cool!!


Sent from Never Neverland using Tapatalk 2

D3skier
06-12-2013, 05:08 PM
Very Cool!!


Sent from Never Neverland using Tapatalk 2

need to find a wakeboarder I can tack on the back end maybe that would trigger some more interest?

onejdgreen
06-12-2013, 08:42 PM
need to find a wakeboarder I can tack on the back end maybe that would trigger some more interest?

Love the slalom skier!!!! Cost??? Oh and here is where I put a couple of mine that you already sent me....

Double D
06-12-2013, 09:19 PM
need to find a wakeboarder I can tack on the back end maybe that would trigger some more interest?

Take your pick:

https://www.google.com/search?q=Wakeboard+Sticker&rlz=1G1GGLQ_ENUS314&tbm=isch&tbo=u&source=univ&sa=X&ei=3w-5UZavOsucrgHo2YDQBQ&ved=0CFMQsAQ&biw=1920&bih=993

HRC
06-13-2013, 01:35 PM
Got my stickers Wednesday, they look great. Thanks.

JMLVMI
06-13-2013, 01:42 PM
D3, do we just PM you with size/type request for a price? Need a big plain white sticker for the back of the new Suburban. Thanks!

D3skier
06-13-2013, 01:43 PM
Love the slalom skier!!!! Cost??? Oh and here is where I put a couple of mine that you already sent me....

these will be 7 each
colors available are red yellow navy blue black red and teal

Ben
06-13-2013, 01:52 PM
these will be 7 each
colors available are red yellow navy blue black red and teal

No white?

D3skier
06-13-2013, 02:36 PM
No white?

yes... my bad and white

D3skier
06-13-2013, 02:36 PM
D3, do we just PM you with size/type request for a price? Need a big plain white sticker for the back of the new Suburban. Thanks!

about the largest I can make due to size restriction with my wife's machine is about 1 3/4" tall and 14" long

gsxrjtt
06-14-2013, 03:52 PM
getting this cut tonight for my metallic green nissan titan

mikeg205
06-14-2013, 06:41 PM
nice!

ktmrider6
06-24-2013, 06:02 PM
D3
What would you charge for a set of Forest Green ones?
Thanks,
Phil

ktmrider6
06-24-2013, 06:04 PM
Might help if I tell you Team Mastercraft

D3skier
06-24-2013, 06:13 PM
D3
What would you charge for a set of Forest Green ones?
Thanks,
Phil

don't have any forest green vinyl left... sorry

D3skier
07-11-2013, 10:36 AM
can't believe this died so quickly.... found a boat I'm very interested in but can't get a response from the seller...

http://www.boattrader.com/listing/2002-Mastercraft-197-362883

André
07-11-2013, 11:34 AM
can't believe this died so quickly.... found a boat I'm very interested in but can't get a response from the seller...

http://www.boattrader.com/listing/2002-Mastercraft-197-362883
Price is right! hours,engine hp...:confused:
Pix don t work for me...
Good luck and hurry,summer is short!:)

maxpower220
07-15-2013, 04:01 PM
can't believe this died so quickly.... found a boat I'm very interested in but can't get a response from the seller...

http://www.boattrader.com/listing/2002-Mastercraft-197-362883

I've called and emailed him, no response.

D3skier
07-15-2013, 04:30 PM
I've called and emailed him, no response.

I even tracked down the number directly to his office and he wasn't in. Receptionist said she would send him a message and of course no response from that as well...

Redstorm
07-28-2013, 12:41 PM
Hey D3 good job on the stickers! Do you have red Team Mastercraft and how do you go about getting them? What size do they come in? Thanks!

D3skier
07-28-2013, 05:11 PM
Hey D3 good job on the stickers! Do you have red Team Mastercraft and how do you go about getting them? What size do they come in? Thanks!

size on hand is 1.5 tall by 7 long for small ones or large ones are 2.5 tall by 11.5 long

small price is $4 large is $7

Redstorm
07-28-2013, 11:13 PM
I'd like to get 3 small and 1 large all in red.

D3skier
07-28-2013, 11:54 PM
I'd like to get 3 small and 1 large all in red.

PM at ya...

Redstorm
08-18-2013, 02:11 PM
size on hand is 1.5 tall by 7 long for small ones or large ones are 2.5 tall by 11.5 long

small price is $4 large is $7

Hey D3.....stickers turned out great. WOW very impressed! Probably ordering more down the road! Thanks buddy!

D3skier
08-18-2013, 04:42 PM
Hey D3.....stickers turned out great. WOW very impressed! Probably ordering more down the road! Thanks buddy!

thanks... have a lot more in hand and ready to ship

zsqure
08-29-2013, 11:34 PM
Hey D3, one of your stickers that made it to The Buckeye Bash this year.

zsqure
08-29-2013, 11:35 PM
One day I may figure this thing out.

D3skier
08-30-2013, 12:05 AM
Hey D3, one of your stickers that made it to The Buckeye Bash this year.

looks good... is that a Tuareg?

thatsmrmastercraft
08-30-2013, 01:29 AM
One day I may figure this thing out.

It's not that difficult. :rolleyes:

zsqure
08-30-2013, 12:37 PM
looks good... is that a Tuareg?
New body beetle for my 50 mile daily commute.

mikeg205
08-30-2013, 02:11 PM
New body beetle for my 50 mile daily commute.

love the reflection of you and your boat...

JDC
08-30-2013, 02:12 PM
Hey D3, one of your stickers that made it to The Buckeye Bash this year.You can see your boat in the reflection of both the paint and the chrome. ;)

Oops... I was a minute behind you, Mike. LOL

zsqure
08-31-2013, 09:34 AM
You can see your boat in the reflection of both the paint and the chrome. ;)

Yes, sadly the boat gets the garage for the season (May thru early October). But I cannot bring myself to stick it outside under a cover, too easy to clean this way.8p

JDC
08-31-2013, 10:36 AM
Yes, sadly the boat gets the garage for the season (May thru early October). But I cannot bring myself to stick it outside under a cover, too easy to clean this way.8pIf mine was easier to get in my garage, I would do the same thing. :)
A manual folding tower and a single width door (90* to the street) makes it way too much trouble.

mastercraftx30surfer
09-04-2013, 01:09 AM
Those look great, what would I have to do to have a couple sent to me? They match my boat perfectly and would look really cool on the window I think

D3skier
09-04-2013, 01:17 AM
Those look great, what would I have to do to have a couple sent to me? They match my boat perfectly and would look really cool on the window I think

what color are you looking for? If you search through this thread you'll see there's a few different stickers available and several different colors as well... just let me know what you are looking for

broncotw
09-05-2013, 06:01 PM
OK! Please tell me how I can get a set of these in blue?


was bored tonight so figured I'd try some in navy blue
96339

thijs
09-13-2013, 06:32 PM
I wish you had a brushed aluminum vinyl to match my F150 Platinum!!! I am interested in two of the Mastercraft skiers.

I'd prefer one in brushed aluminum (I'd pay a premium for this!!) and another in white, but would take 2 white ones.

How much shipped to Alberta Canada? T0M-0S0

D3skier
09-13-2013, 08:39 PM
I wish you had a brushed aluminum vinyl to match my F150 Platinum!!! I am interested in two of the Mastercraft skiers.

I'd prefer one in brushed aluminum (I'd pay a premium for this!!) and another in white, but would take 2 white ones.

How much shipped to Alberta Canada? T0M-0S0

PM sent

g-mantrix
09-13-2013, 11:32 PM
Who is printing the shield decal, would like 2 about 15"
In a green coloring, I am in Aus and i figure post wouldn't be too much

mikeg205
09-14-2013, 10:19 AM
There should sign shops in AU that can make the decals for you... the artwork is here...

https://www.dropbox.com/sh/o91j4vsfromgu2x/r0N1CR5VtR

I make them - I am not speedy - make them when I can.

D3skier
11-19-2013, 12:39 PM
ok this kind of died and taken over by others so I'm blowing out remaining stickers...

103199

Double D
11-19-2013, 02:35 PM
ok this kind of died and taken over by others so I'm blowing out remaining stickers...

103199

I might help you out this that. Send me a PM with your complete inventory. :D

D3skier
11-19-2013, 03:08 PM
I might help you out this that. Send me a PM with your complete inventory. :D

PM sent

Cloaked
11-19-2013, 08:13 PM
There should sign shops in AU that can make the decals for you... the artwork is here...

https://www.dropbox.com/sh/o91j4vsfromgu2x/r0N1CR5VtR

I make them - I am not speedy - make them when I can.

Can you make me a set for this, X2 target included? Man up and do good.... otherwise, you go second rate... :D :D Here's an opportunity for you to excel......

Thanks

.

hos505
11-19-2013, 09:36 PM
PM sent

D3skier
11-19-2013, 10:22 PM
Can you make me a set for this, X2 target included? Man up and do good.... otherwise, you go second rate... :D :D Here's an opportunity for you to excel......

Thanks

.

I can't make them as big as MikeG205 due to limitations with my cutter. I can only make them as big as a 11 x 11

Cloaked
11-19-2013, 10:43 PM
I can't make them as big as MikeG205 due to limitations with my cutter. I can only make them as big as a 11 x 11
Thank you Sir. I appreciate the feedback all the same....

:)

mikeg205
11-20-2013, 12:09 AM
I now have artist access - so I can make larger new vinyl. The x series vinyl won't be cheap - plus there is the installation factor. Larger decals are harder to install.

the above pictured vinyl will take my artist 3 hours to recreate - cost - $200 to develop. vinyl about the same price.

D3skier
11-20-2013, 12:40 AM
I now have artist access - so I can make larger new vinyl. The x series vinyl won't be cheap - plus there is the installation factor. Larger decals are harder to install.

the above pictured vinyl will take my artist 3 hours to recreate - cost - $200 to develop. vinyl about the same price.

any luck with vectoring that image I sent you a few months ago? I see you added it to the download stuff

mikeg205
11-20-2013, 12:47 AM
going to star drawing it in december

D3skier
11-20-2013, 01:25 AM
going to star drawing it in december

star drawing? what's that?

mikeg205
11-20-2013, 01:42 AM
start - ;)

Cloaked
11-20-2013, 07:43 PM
I now have artist access - so I can make larger new vinyl. The x series vinyl won't be cheap - plus there is the installation factor. Larger decals are harder to install.

the above pictured vinyl will take my artist 3 hours to recreate - cost - $200 to develop. vinyl about the same price.I hear you. You should have a PM from a potential buyer that I am communicating with. He's overseas in need. I sent him the links here in a PM to get back to you. Thanks

D3skier
11-26-2013, 04:24 PM
ok I have any over abundance of these things left need to get rid of them... plus need to figure out how to supplement the unemployment crap (and they say the job market is getting better.... I call BS!!!)

small TMC stickers $2
large TMC stickers $4

Table Rocker
11-26-2013, 06:27 PM
ok I have any over abundance of these things left need to get rid of them... plus need to figure out how to supplement the unemployment crap (and they say the job market is getting better.... I call BS!!!)

small TMC stickers $2
large TMC stickers $4
Count me in for a sheet of white if you have them. I will send you a PM.

D3skier
06-25-2014, 05:18 PM
113536

Drake2785
07-08-2014, 02:43 PM
113536


How much for the team Mastercraft large in red


Sent from my iPhone using Tapatalk

D3skier
07-08-2014, 02:52 PM
How much for the team Mastercraft large in red


Sent from my iPhone using Tapatalk

at this time I'm not able to produce any more due to my cutter isn't working and just sold the whole lot to DoubleD for the buckeye bash

mikeg205
07-08-2014, 03:00 PM
sorry to read about the cutter D3

D3skier
07-08-2014, 03:08 PM
sorry to read about the cutter D3

that's cool... no big deal really. it was my wife's pazzles machine and I just wore it out. I'm watching some used cutters on ebay right now but the biggest issue I see so far is they don't have software or they're too expensive

D3skier
07-22-2014, 03:50 AM
well been messing with the cutter a bit to try and get it going again and has been difficult but did produce this new "prostar" sticker

115047

D3skier
07-22-2014, 03:01 PM
need some ideas for color combinations on this one... any ideas?

Jschoeppy
08-16-2014, 04:56 PM
How much for a say 18" black mastercraft sticker

mikeg205
08-16-2014, 07:40 PM
well been messing with the cutter a bit to try and get it going again and has been difficult but did produce this new "prostar" sticker

115047

is it the cutter/vynil or do you have too many points in the art?

D3skier
08-17-2014, 10:35 PM
is it the cutter/vynil or do you have too many points in the art?

probably too many points... not really good with AI

D3skier
08-17-2014, 10:36 PM
How much for a say 18" black mastercraft sticker

sorry... the largest I can make is an 11 1/2" Possibly talk to mikeg205 he could make it for you

Jschoeppy
08-18-2014, 06:16 AM
Ok thanks