PDA

View Full Version : PSS installation


dchatagnon
09-25-2005, 05:35 PM
I'm trying to install the PSS parts replacment for stuffing box. To keep the carbon at a good temperature. The installation guide says you have to plug a hose from the PSS to the thermostat using a T adapter and I don't really know how to do it or where is the best spot to put that T adpater. Before to install this new thing, I would like to see some pictures of that system. If anyone of you has already a PSS system on their boats, that would be great if you could post some pics...
thanks.

Damien

jimmer2880
09-25-2005, 08:15 PM
Sorry - no pic's handy. But - if your in the passenger's seat, facing the rear of the boat looking at the engine. I cut the T into the upper-most hose on the driver's side of the T-stat triangle.

I installed my PSS 5 years ago & haven't touched it since. Excellent investment, you'll never be sorry.

dchatagnon
10-01-2005, 10:01 AM
Thanks for your help jimmer2880.
I have installed it today and tested it on the lake. Works great! No water on the bilge.