PDA

View Full Version : X-30 -- Line-X Rear Compartments No More Stink and Mildew


romerorrr@yahoo.com
04-13-2013, 01:45 PM
So here's the completed project...



The costs were $650 for the Line-X color matched to Gray. You can save some money by removing all the glue from the cover panels and by lightly sanding the glue off the fiberglass.



I also added some Restraurant flooring to add traction and allow for an air gap between the floor and the vests and wet crap that you throw into the lockers. This project seemed pretty straight forward but ended up being quite a tedious process, I did however spray down all my carpets at the car wash and everything drained out really quick and easy.



If you live in the Northern Ca area...I can't say enough about the great customer service at Placerville Line-X. Lisa is the owner there and she is possibly the best owner of a small business you can find. She also took care of the Line-X on my fenders, I'll posts those in a bit...




BEFORE:

93076

93077

93078

AFTER:


http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93046&d=1365869721



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93047&d=1365869738



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93048&d=1365869757



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93049&d=1365869778



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93050&d=1365869793





Sent from my iPad using Tapatalk


Sent from my iPad using Tapatalk

texasjet
04-13-2013, 01:57 PM
That looks GREAT! Also like the lighter gray color, makes it easier to see down into the lockers and the rubber matting will be perfect so stuff doesnt slide around and sit in water.

Nice job.

I have long wondered why MC doesnt do something like the spray in truck liner bed and removable rubber mats.

romerorrr@yahoo.com
04-13-2013, 02:01 PM
Daddy's (X-30) "Honey Do" list



- Line x compartments

- Added Cooks Kitchen Floor sections in compartments

- Line X fenders

- Line X swim Step

- Replaced Brake seals and flush

- Upgraded to Bluetooth Clarion Marine M502 deck

- Welded joints of all trailer step bracket supports

- Welded Trailer Guides U bolt connection

- Replaced Jack with Fulton Twin Wheel

- Added Fulton Retractable Tie Downs

- Replaced Winch with Fulton F2

- Remove Stock ballast manifold and added (2) separate thru hole

- Polish and replaced Green Ballasts puppies to Pumps

- Replace JL speaker covers

- Added Fresh Air Exhaust

- Replaced Trailer Cuppler and Slide Mechanism

- Replaced Trailer Bunk Carpet

- ReboltThrottle Bolter

- Added Stainless Steel Cup Holders

- Added all new LED's on the trailer



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93055&d=1365870372



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93056&d=1365870383



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93057&d=1365870397



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93058&d=1365870412



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93059&d=1365870423



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93060&d=1365870436



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93061&d=1365870458



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93062&d=1365870471









Sent from my iPad using Tapatalk


Sent from my iPad using Tapatalk

romerorrr@yahoo.com
04-13-2013, 02:02 PM
Daddy's (X-30) "Honey Do" list cont...http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93063&d=1365870605



- Line x compartments

- Added Cooks Kitchen Floor sections in compartments

- Line X fenders

- Line X swim Step

- Replaced Brake seals and flush

- Upgraded to Bluetooth Clarion Marine M502 deck

- Welded joints of all trailer step bracket supports

- Welded Trailer Guides U bolt connection

- Replaced Jack with Fulton Twin Wheel

- Added Fulton Retractable Tie Downs

- Replaced Winch with Fulton F2

- Remove Stock ballast manifold and added (2) separate thru hole

- Polish and replaced Green Ballasts puppies to Pumps

- Replace JL speaker covers

- Added Fresh Air Exhaust

- Replaced Trailer Cuppler and Slide Mechanism

- Replaced Trailer Bunk Carpet

- ReboltThrottle Bolter

- Added Stainless Steel Cup Holders

- Added all new LED's on the trailer



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93064&d=1365870620



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93065&d=1365870635



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93066&d=1365870650



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93067&d=1365870661



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93068&d=1365870676



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93069&d=1365870691



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93070&d=1365870705



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93071&d=1365870726





Sent from my iPad using Tapatalk


Sent from my iPad using Tapatalk

romerorrr@yahoo.com
04-13-2013, 02:03 PM
http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93074&d=1365871289



http://www.mastercraft.com/teamtalk/attachment.php?attachmentid=93075&d=1365871307





Sent from my iPad using Tapatalk


Sent from my iPad using Tapatalk

CantRepeat
04-13-2013, 05:08 PM
That tie-down buckle sure looks like it is going to wear into the gelcoat.

The lineX in the compartments looks nice.