View Full Version : ND Mini Tower

02-28-2013, 09:46 AM
Need to get some board racks for my 06 New Dimension Mini Tower on PS 197. Is ND the only place I can pick them up, and is there any swivel racks that will fit.

03-04-2013, 12:06 PM

03-04-2013, 01:46 PM
I was able to pick up a set at my local dealer, who had a set. Otherwise I think you are only going to be able to pick them up from ND, somewhere around $200 a side. They don't have any swivel options.

check onlyinboards.com in the accessory area for other manufacturers that would be more "universal"

03-04-2013, 03:33 PM
I had Samson sports spinning racks on my ND mini tower when I had my Pro 190. Samson racks fit ND Towers, they look and work great. I believe these racks are by far the best aftermarket racks made. They spin very smooth with positive locking on each end with pull of a handle. I sold the boat and the racks or I would send you some photos. Racks are not cheap but from fist hand experience they are fist class all the way and I would highly recommend it.
Photos: http://www.mastercraft.com/teamtalk/showthread.php?p=911761#post911761
Hope this helps and Good luck!

03-04-2013, 04:14 PM

nice "rack"

03-04-2013, 04:14 PM
Nothing too fancy about the ND racks that I have on my 2000 prostar. Do your racks just mount to the flat plate on the tower. If so you could just source off ebay for cheapies and make them fit. The ND ones I have are a touch short in the fingers and a little tight on some boards. Had to file the edges so you didn't split your head open also. post a photo of your tower.