PDA

View Full Version : WTB Swim Platform Bracket


MonteModster
09-20-2012, 10:56 PM
I am looking for a used swim platform bracket for a 92 Mastercraft 20.5
I only need one complete side, and i think they are the same for both sides.

Matt555
03-31-2013, 09:16 PM
Hi- did you find where to buy the brackets? I am after the transom mount bracket only. Cheers Matt

jnietups
04-30-2013, 10:25 PM
Looking for a transom mount for a 1993 prostar, only need one side . Did you find yours, if so please email me at jnietupski@ cox.net for additional information.

gregmessick
05-06-2013, 03:50 AM
I am looking for a swim platform bracket for a 2002 Xstar. Can anyone direct me on how to find one?

Thanks

Greg

kellett5261
04-20-2014, 07:31 PM
Looking for a transom mount for a 1993 prostar, only need one side . Did you find yours, if so please email me at jnietupski@ cox.net for additional information.

any luck with finding brackets? i also need one side .... let me know thanks

rydog
04-20-2014, 08:05 PM
I would also like the brackets for a 2002 xstar!!

atihanyi
04-20-2014, 08:07 PM
there is one on e-bay right now

cwoods915
07-26-2015, 10:58 AM
I know it's an old thread but anyone have any luck locating a single transome bracket? Looking specifically for a 2001 Maristar 230. Found a complete set on mcpartsdepot.com but really only need one replacement part.

AlbertaSurfer
07-26-2015, 12:29 PM
I took the whole assembly off my boat last year and have all the parts.

What dimension are your mounting brackets? I'll be at the lake next weekend and I'll grab them from the shed if they're the same size.

cwoods915
07-26-2015, 11:10 PM
AlbertaSurfer - I can send you the dimensions tomorrow.

The OEM replacements that I found say that they fit 99-00 Prostars and 00-05 Maristars so I'd think that would include a 99 X-Star. I really appreciate your help though

AlbertaSurfer
07-27-2015, 10:49 AM
You're just looking for the part that mounts on the transom right? The flat box the platform slips into?

Purewakes
07-27-2015, 07:08 PM
You're just looking for the part that mounts on the transom right? The flat box the platform slips into?

I have a large selection of brackets and mounts but no way to match by year and model. If you give me some dimensions I bet I have what you need. I attached a pic with just a couple examples of what I have. I think the mount pictured has a number on back #375B and that one seems pretty common.

kellett5261
07-28-2015, 04:45 PM
I have one side complete set for a 1993

kellett5261
07-28-2015, 04:53 PM
I have a large selection of brackets and mounts but no way to match by year and model. If you give me some dimensions I bet I have what you need. I attached a pic with just a couple examples of what I have. I think the mount pictured has a number on back #375B and that one seems pretty common.

what are you letting these go for?

OldSkiBum
07-28-2015, 05:17 PM
Call Alloy Marine in Redding CA. Or on-line at alloymarine.com.
They manufacture and sell retail new swim step brackets and hardware. You can buy one piece or a full set. Good Luck.

CMA205
07-28-2015, 05:55 PM
I'll jump into the swim platform mix.

01' 205V w/ teak swim platform that sits way to low in the water (with no ballast)

Looking for help in finding/buying correct replacement brackets so that the platform sits up and out of the water AND creates enough clearance for tie down straps to be functional.

AlbertaSurfer
07-28-2015, 08:44 PM
I'll jump into the swim platform mix.

01' 205V w/ teak swim platform that sits way to low in the water (with no ballast)

Looking for help in finding/buying correct replacement brackets so that the platform sits up and out of the water AND creates enough clearance for tie down straps to be functional.

This is the same reason I replaced mine. I picked up a set for an X1, as they had taller brackets by then. The kit came with all new everything, but the transom mounted portion is the same anyway. I took the old brackets off the teak. Dropped the new brackets into the holder, and set the teak on top. I made sure things were square, left a gap for the transom straps and screwed it all down. Easy.

http://mcpartsdepot.com/products/bracket-swim-platform-14-drop-in-tall-06-setx1-08-12

CMA205
07-29-2015, 10:34 AM
Thanks AlbertaSurfer!

AlbertaSurfer
07-29-2015, 11:24 AM
Thanks AlbertaSurfer!

Yeah, no worries. MCParts Depot is kinda pricey, but they have what you need. You can recoup some cost by selling off the bracket holders you don't need.

Purewakes
07-29-2015, 01:27 PM
what are you letting these go for?

PM me your specific needs and I can give you prices. I have a BIG selection and will be more than fair on prices.

AlbertaSurfer
08-04-2015, 09:31 AM
Here's what I have, x2

Purewakes
08-04-2015, 02:15 PM
Here's what I have, x2

There should be a part number on the side of the bracket. I have a big selection and the mounts too

CMA205
08-05-2015, 08:16 PM
PM me your specific needs and I can give you prices. I have a BIG selection and will be more than fair on prices.

Purewakes - I am looking for brackets off an X1. Part# is 530834 I think... Please PM me if you have them.

Thanks!

Purewakes
08-06-2015, 11:42 AM
There should be a part number on the side of the bracket. I have a big selection and the mounts too

AlbertaSurfer-From your pic it looks like it's stamped 104 on the side of the bracket. If so, yes I have that bracket and mount. PM me for prices if you still need it

AlbertaSurfer
08-06-2015, 11:52 AM
AlbertaSurfer-From your pic it looks like it's stamped 104 on the side of the bracket. If so, yes I have that bracket and mount. PM me for prices if you still need it

Thanks, but I don't need them, I was showing another guy in the thread what I had available, sorry for the confusion.

Purewakes
08-06-2015, 03:37 PM
Purewakes - I am looking for brackets off an X1. Part# is 530834 I think... Please PM me if you have them.

Thanks!

I don't have 530384 but it looks very similar to one I do have 530381. Check out the pic

Height 10" length 14"

CMA205
08-10-2015, 10:47 PM
I don't have 530384 but it looks very similar to one I do have 530381. Check out the pic

Height 10" length 14"

Pm sent

chip b
08-28-2015, 03:00 PM
Yes I am looking for these for a 1996 prostar lt1

Purewakes
08-28-2015, 03:06 PM
Yes I am looking for these for a 1996 prostar lt1

Do you have an old bracket? The part number is usually stamped on the side. I have an assortment but no way to look them up by year and model