View Full Version : 91 190 prostar bow lift ring
08-26-2012, 08:41 AM
The lift ring on the bow of my 91 prostar is loose. Has anyone had a similar problem and can it be tightened down? I was under the impression they were built into the boat and should not move.:mad:
08-26-2012, 09:05 AM
They are made to wiggle l-r maybe 1/4" total. tighten it down and you will crack your deck. I have not been up under there but my 12 year old says the top ring and bow loop are connected. FWIW.
08-26-2012, 09:29 AM
Some people have tightened their's up here... my 95 is a tad loose.. you can tighten but mine was crooked when I tighten it... so I put it back to straight...not a big deal.
08-26-2012, 10:29 AM
Thanks for the info guys. I thought that I might have to climb up into the front and tighten it. Mine is crooked as well so it may be worth a shot. I thought that they were built into the glass and were not supposed to move. I did not even think about cracking the glass. I will try to snug it down. Thanks
08-26-2012, 10:44 AM
08-26-2012, 10:18 PM
Give you an idea how the lift ring attaches. The bottom bracket mounts on the inside of the hull opposite of the winching eye u-bolt. Hope that helps...