PDA

View Full Version : 2010 X2 BIG depth finder


jgraham37128
08-12-2012, 10:03 PM
I have a 2010 and noticed the last two times out my depth finder in the BIG doesn't seem to be working. i did notice when i first got in the water it was working but an hour into it it stopped and was just reading 0.0 depth. Where should I start to look?

JG

GoneBoatN
08-13-2012, 02:46 PM
When I had that problem the dealer had to replace the triducer to fix the problem.

Red 08 Xstar
08-19-2012, 02:57 PM
I had the same problem. Replaced the Airmar Triducer and it is working again.

jgraham37128
08-19-2012, 07:24 PM
OK 2nd time out again and same thing it showed 30.5 ft when first in but after a little while it just reads 0.00. Is this what everyone else's does too? Or is it 0.00 when first put in the water?


My boat is a little over a year old is it under warranty?

Red 08 Xstar
08-22-2012, 01:50 AM
Mine was intermittent like that at first, then it completely quit working and always read 0.
The warranty on electronics is 1 year.