PDA

View Full Version : 1997 ms200vs master cylinder


lloydiewater
08-09-2012, 02:06 AM
I was just wondering what master cylinder I need for a single axle 1997 ms200vs trailer? I just replaced my hub-break drums,bearings and backing plates and I went to bleed my lines and the cylinder was empty and had rust in it.

bturner2
08-09-2012, 10:02 AM
That will depend on what actuator you have. It is most likely the UFP but you'll want to make sure. If your brakes are that bad you may want to consider replacing the entire unit as at that age the shock is probably bad or at least not in too good of shape. Pacific Trailers is a good source for discount parts. Too bad you already replaced the backing plates. This would have been the perfect time to upgrade to disc brakes.....

http://www.pacifictrailers.com/