07-19-2012, 10:40 PM
2003 X30 5.7 MCX, I have checked all sensor inputs and circuits more than once just to be sure (everything good there). It has ignition spark and will start if I add fuel manually into the throttle body, the fuel pump is activated by the relay on crank and it has 45-48 psi fuel pressure just no injector pulse (checked with noid light). The original pcm was faulty due to corrosion intrusion through the actual pcm housing, I assume caused by electrolysis and salt water exposure. I purchased a new in box unused MEFI4b pcm still same problem. HELP! Many thanks for any good ideas.