PDA

View Full Version : Help


Tom190driver
07-12-2012, 10:18 PM
Got a SKYLON 2 peice pole on ebay, came today it has a hole with pin in bottom part that goes on my pylon. do i have to drill a hole through the OEM pylon so the pole will not turn? THANKS

rholmes
07-12-2012, 11:46 PM
No, you set the larger diameter pylon piece over the oem ski pole. Then you put the smaller diameter skylon piece inside the larger one. The pin can be pulled to drop the height of the smaller diameter piece down about a foot or so if you wish to.

O2BESOHUGE
07-13-2012, 08:53 AM
It Doesnt Spin When You Set The Cable Strap Out Front Over The Bow And Get It Tight

Tom190driver
07-14-2012, 10:31 PM
Thanks Guys, Skylon pole is up an working good! The cable was to long so had to fix that 3.18$ was a cheap fix, also put one wrap of bubble packing around my pylon an it"s goin tight. Thanks

mikeg205
07-14-2012, 10:37 PM
You can get the mesh sleeves from skylon...

http://www.skylonsports.com/parts-accessories/fatpole-mesh-sleeves.html

Tom190driver
07-14-2012, 10:56 PM
Thanks mgorczakl1, I"ll check it out they wanted 130.00$ for a 84" cable that works on MC boats. Did it myself for 3.18$