07-08-2012, 08:32 PM
We have an 03 PS 209. Our neighbor has borrowed us his contour boom off his 01 209, but the mount for the pylon in front of the engine is too big, or the boom is too large for the mount. When I line it up correctly, I can't tighten the mount around the pylon (mount turns port and aft around the pylon) because the boom is already tight on the top of the mount (the two bottom bolts are not tight, but the boom bolt is, preventing me from tightening the lowers). Looking for a used mount to use the boom this weekend. No idea of either brands of boom or mount.