PDA

View Full Version : Tower Mirror plastic spacers - where to get new ones???


prostar205
07-03-2012, 05:27 PM
Does anyone know where to get new plastic spacers for the MC tower mirror? These are the pieces (2 per mirror) that go between the pins on the mirror arm and the socket portion of the part that goes around the tower leg. Sorry, I don't have a picture since I lost mine.

Jim@BAWS
07-03-2012, 06:56 PM
I know where...let me think about it!!!

Kell
07-04-2012, 10:38 AM
I know where...let me think about it!!!

^ 😄
Mine were loose from day one. Siliconed them in, problem solved.


Sent from my iPad 2 3G using Tapatalk

Hrkdrivr
07-04-2012, 10:46 AM
^ 😄
Mine were loose from day one. Siliconed them in, problem solved.


Sent from my iPad 2 3G using Tapatalk

Great idea. We haven't lost them yet, but it's always a ritual to make sure we put them in a baggie in the glove box at the end of the day. We've spent a lot of time searching for them after they drop to the ground. I feel silly for not having thought of this.

And yes, Jim can fix you right up!

prostar205
07-04-2012, 12:25 PM
Jim - I'm all ears. Let me know and I'll get them ASAP and then run out and get a tube of silicone to make sure they don't get lost again.

Thx - Tom

CantRepeat
07-05-2012, 01:07 PM
Any dealer can get them or has them in stock. I used epoxy on mine. I tried silicone but it didn't last but half a day. I used epoxy the second. I mixed it up but only use a couple of drops and only on the cheek part of the aluminum.