View Full Version : Seat

07-02-2012, 07:20 AM
Has anyone had to reconnect their driver's seat. Mine, (2002 197)has come loose on one side. It appears that the bolts have pulled out. Does not look like much working room. Any ideas on how to pull apart and rebuild?

07-02-2012, 10:49 PM

07-03-2012, 01:53 AM
With a image - options maybe easier, but Good quality epoxy placed back in the holes - then pilot hole for the screw should work.

If there's any way to get to bottom side of floor panel - T-Nuts epoxied in can then use 1/4" SS machine screws/bolts.
T-nuts do have tangs that dig in about 3/8" inch when bolts tighten up, so epoxy is not necessary.
Just an extra measure.