View Full Version : 2007 X2 Ballast Pumps
06-16-2012, 03:55 PM
Had my boat water tested for the new season and the pupms were working now all 3 do nothing at all is there a breaker? I can't believe that all 3 would crap out at the same time , I know these things are Voodoo with the timers and all I wish MC would just make things simple
06-16-2012, 06:40 PM
There should be some breakers (look like buttons, white on my '06 x2) under the back seat on the port side. At least that's how it is on my boat. There is also some breakers under the stearing wheel.
Did you try with engine running (1500rpm recommended) ?
The red LEDs on the switches are working (blinking ?)
I just had the problem of low batteries where my pump wouldn't work but engine could run...and one day later my batteries were totally dead...
06-17-2012, 12:58 PM
Thanks had a new battery put in last year but no I didn't try running the motor at 1500 also no breaker under the dash for the pumps but I will check under the back seat
06-18-2012, 03:13 PM
The is 3 breakers right on the timer box under the back seat. Like asked by Fab, are the LED on the switches working? Can you heard the click done by the timers when playing with the swithches? if not may be the the main wire was forgotten beside the batterie and is not connected...
Let us know.
06-18-2012, 03:20 PM
Thanks for the heads up, I'm going to Flash Marina on thursday to have it checked out Mark in service is really good and I'm going out on the lake afterward. Didn't think of the battery box , I'll check it out. Thanks
06-22-2012, 10:54 AM
Mark at Flash Marine fixed my problem today when I put the Battery in I missed a ground wire , My flaut completely . Glad I found Mark and Flash Marine
06-22-2012, 04:52 PM
Thanks to let members know.