PDA

View Full Version : Lifting eye bracket


nkorep2
05-21-2012, 12:47 AM
Hello,
I have a 1990 Prostar 190 Im restoring. Im needing to replace the bracket in the bow of the boat, to which the lifting eye is attached. Its a rusted mess. Ill be replacing the stern backing plates as those are gone as well. I havent been able to locate this bracket, is there an after market source?

Thanks,
Nikolai

Sullivan
05-21-2012, 09:56 AM
Not that I know of but you can probably just make one or have one made pretty easy. Isn't it just a piece of bent metal with two holes in it that should be glassed into the bow?

nkorep2
05-21-2012, 10:41 AM
im talking what the eye on top connects to, i think it more complex the that.

nkorep2
05-30-2012, 11:17 AM
Heres the bracket Im talking about.

https://lh5.googleusercontent.com/--VzTlJbkiWc/T8VeU-PQQUI/AAAAAAAACyc/e_d9zYQh0WQ/s640/2012-05-29_19-35-29_383.jpg

As you can see, mine needs to be replaced. Anyone know where I can get a replacement, or am I going to have to rebuild it from scratch?

tph
05-30-2012, 12:21 PM
Mine has this style and is available at the following site:

http://www.foreandaftmarine.com/Bowliftingeyes.htm

nkorep2
05-31-2012, 11:03 PM
Mine has this style and is available at the following site:

http://www.foreandaftmarine.com/Bowliftingeyes.htm

Thats what Im looking for, thanks!