PDA

View Full Version : 205V, Cant remove the trans filter


Redstorm
05-19-2012, 02:34 PM
Boaght an 01 205v and love the boat. TUrned the hex nut top of tranny and can not remove lid to get to the filter. Maybe I'm missin something.
Any help would be greatly appreciated.........Thanks

Hurth 630v

mtajpa
05-19-2012, 09:53 PM
It has to be completely loosened and then you may have to rotate the cap. You may try lifting on the cap while rotating. If it is completely loosen you can try to pry the cap upward. The allen screw on the top squeezes the two parts of the cap together to expand the seal.

mtajpa
05-19-2012, 09:59 PM
Check out this post if you need more info

http://mastercraft.com/teamtalk/showthread.php?t=22552&highlight=mtajpa&page=2

Redstorm
05-20-2012, 02:57 PM
When I turn the hex the entire nut and lid turns to where the stop hits the body. So the hex nut should loosin from the lid as well..... Thanks, i have been frustrated for a couple of days beatin on my head. Big time thanks mtajpa!! Have a good one!

holdenh2o
05-20-2012, 03:04 PM
When I removed mine, it was very difficult to "pop" off. Once the screw is loosened, you should be able to apply a little pressure to remove the cap.