PDA

View Full Version : Help me choose my Damper plate


mart_it
04-26-2012, 07:38 AM
So after pulling my tranny off 2-3 weeks ago I now need to order my damper plate. My local Mastercraft dealer told me they don't order them from Indmar anymore so I decided to order one online.
I've narrowed my choice down to 2 plates, can someone tell me which one I should get?
I have a powerslot tranny 1:52:1 on a 10-17 model.


http://bpi.ebasicpower.com/pc/ALTDA-107/DAMPERS

http://bpi.ebasicpower.com/pc/ALTDA-108/DAMPERS

CantRepeat
04-26-2012, 08:06 AM
Does yours currently have white springs or purple springs? I would also measure the flywheel.

Purple Springs for Velvet Drive 71 & 72 with heavy duty 14"

The differences are clearly stated.

mart_it
04-27-2012, 10:30 AM
The Damper plate i'm replacing doesn't have color.
It's shape is triangular kind of like the Alta Sachs model but looks a little beefier.

I measured my plate from end to end and it looks to be 13''.
I don't have the boat at my house, it's at the cottage so I can't measure the flywheel.

If my plate is 13'', would my flywheel be the same?

Thanks!

CantRepeat
04-27-2012, 01:51 PM
Well going off that website and not having the flywheel it's kind of hard to give a correct answer. At best I'd be guessing for you.

You could call ski dim and tell they what you have, I'm sure they could tell you which part you need. I wouldn't tell them you are buying from a different source but you could at least find out if you have the larger flywheel and then pick the correct part.