PDA

View Full Version : adjusting perfect pass?


agarabaghi
03-16-2012, 07:50 AM
We added about 700lbs more to the boat, and I know ive read there is a way to make perfect pass a bit more aggressive when getting to speed. The boat gets on plane just fine, but when perfect pass kicks in, it drops about 1 mph and then takes a bit to come back. Isn't there a way to adjust it so it doesn't do that?

Thanks!

agarabaghi
03-16-2012, 07:54 AM
KDW (Throttle Pull Rate) – KDW can be changed using up or down keys. The higher the value, the more aggressive the control. Heavy boats may need higher values. Factory setting is about 180. Normal range is 100 – 200.

I guess if i bump this up a bit it should help ?

agarabaghi
03-16-2012, 08:30 AM
KDW is 180 from the factory, it was currently set to 740, i bumped it to 780. What are some peoples settings?

X1, MCX, 3200lbs ballast.