PDA

View Full Version : Prostar 205 tandem trailer


crew6
03-14-2012, 07:36 PM
I'm hoping to reach a larger group then just the trailer tech forum. For a 1994 Prostar 205, the measurement from trailer end to each axle is ?? I'm getting several measurements and Mastercraft, it seems, does not keep records that far back. This is not a Z drive of course, but any 205 up to the hull change in 96 should work fine. Thanks.

Stritt
03-14-2012, 08:08 PM
I gave you the measurements before, let me know if you need them again. Picture of 97 205 on a 2000 205v/Xstar tandem and the original single for reference points.

Stritt
03-14-2012, 08:13 PM
So much for your broader audience ;) That got booted from General are quick.

crew6
03-14-2012, 10:13 PM
That may be the answer. If your tandem trailer originally came from under a v-drive boat, it would explain why the axles are set further back then the measurements from another respondent. Does the tongue weight feel about right?

Thanks again for your time, I do have your measurements written down.

Yes, the broader reach didn't last long!