PDA

View Full Version : 81' 351w Harmonic Balancer


81SNS
12-04-2011, 08:02 PM
I have removed and am looking for a replacement harmonic balancer, none of my local parts houses have been able to come up with one, either to thick or wrong hole pattern, skidim shows it to be discontinued, I have spoken with Damper Dr in California, they can help, but would like a quicker solution, I didnt know if someone has possibly found one or if it was a PCM specific part? thanks Hal

Cloaked
12-04-2011, 08:09 PM
I have removed and am looking for a replacement harmonic balancer, none of my local parts houses have been able to come up with one, either to thick or wrong hole pattern, skidim shows it to be discontinued, I have spoken with Damper Dr in California, they can help, but would like a quicker solution, I didnt know if someone has possibly found one or if it was a PCM specific part? thanks HalMaybe this?
http://motors.shop.ebay.com/__?_from=R40&_trksid=p3841.m39.l1313&_nkw=351w%20balancer&_sacat=&clk_rvr_id=292071744178&MT_ID=335&crlp=7473170776_9887&tt_encode=raw&geo_id=491&keyword=351w+balancer&adgroup_id=777481516

.

Jim@BAWS
12-04-2011, 08:09 PM
I have removed and am looking for a replacement harmonic balancer, none of my local parts houses have been able to come up with one, either to thick or wrong hole pattern, skidim shows it to be discontinued, I have spoken with Damper Dr in California, they can help, but would like a quicker solution, I didnt know if someone has possibly found one or if it was a PCM specific part? thanks Hal

We can help...no problem

(813) 996 2297

Ask for Chuck

mikeg205
12-04-2011, 09:05 PM
We can help...no problem

(813) 996 2297

Ask for Chuck

Jim, you guys are always ready to help......I think you guys should start wearing capes...:D

81SNS
12-04-2011, 09:46 PM
Maybe this?
http://motors.shop.ebay.com/__?_from=R40&_trksid=p3841.m39.l1313&_nkw=351w%20balancer&_sacat=&clk_rvr_id=292071744178&MT_ID=335&crlp=7473170776_9887&tt_encode=raw&geo_id=491&keyword=351w+balancer&adgroup_id=777481516

.

those all look to be 1" wide mine is only 3/4" and only 28oz not 50oz

j.mccreight@hotmail.com
12-04-2011, 11:24 PM
this has the adapters to fit all years and the duel bolt pattern to fit all pulleys

http://www.summitracing.com/parts/SUM-163289/

Cloaked
12-09-2011, 04:51 PM
bump .............

81SNS
12-09-2011, 05:59 PM
I shipped it to damper doctor in California today, they can repair it for 120.00, the replacement from Baws was in the 500.00 range, everything that I looked at on Summit, was so much wider I could see alot of problems getting my belts aligned, so I just felt this was the best way.......

thatsmrmastercraft
12-09-2011, 06:27 PM
I shipped it to damper doctor in California today, they can repair it for 120.00, the replacement from Baws was in the 500.00 range, everything that I looked at on Summit, was so much wider I could see alot of problems getting my belts aligned, so I just felt this was the best way.......

Sounds like the right way to go.