View Full Version : Prostar stringer engine mounts

10-25-2011, 02:35 PM
I just pulled the engine from my 1990 PS 190. The stringer engine mounts are in terrible shape and need to be replaced. I do not think they are available from MC. Anyone have a set they would like to get rid of? I can have them custom fabricated by that is going to be $$$'s. Mine are all rusted and the galvanizing is gone. (2200 hours in salt water!) Thanks

10-25-2011, 03:02 PM
You should be able to find what you need at SKIDIM


10-25-2011, 03:07 PM
Thanks: I'm looking, however, for the brackets that bolt to the stringers, not the actual engine mount. They are about 30" long made from 3" x 4" angle iron steel. The engine mounts (4) through bolt to the pad brackets that are welded to the angle iron.

Kevin 89MC
10-25-2011, 03:40 PM
I think your best bet is your local steel shop, they should be able to match up the exact size of the angles (aluminum or steel?) or machine a set for you from stock pieces. Probably cheaper than trying to find OE pieces, if even available any more.
Good luck,

10-25-2011, 04:00 PM
Looks like I missed the mark on my first attempt. Fabrication out of stainless perhaps?