PDA

View Full Version : 2004 197 need rocker switches for dash


NoWake197
09-12-2011, 01:55 PM
I have a 2004 Mastercraft 197 that I am currently fixing up. I am working on the dash electrical and I have found all of the dash rocker switches to be heavily corroded. I would like to replace them all, does anyone know where I could find them? I know they are are made by carling Switch and are #'s V1DA, VGDK & V6D1. I have found a few sights with a couple of these switches, but I was hoping to find ones with the original mastercraft rocker covers. If anyone has any thoughts on this I would appreciate it, Thanks1!

CantRepeat
09-12-2011, 02:25 PM
I have a 2004 Mastercraft 197 that I am currently fixing up. I am working on the dash electrical and I have found all of the dash rocker switches to be heavily corroded. I would like to replace them all, does anyone know where I could find them? I know they are are made by carling Switch and are #'s V1DA, VGDK & V6D1. I have found a few sights with a couple of these switches, but I was hoping to find ones with the original mastercraft rocker covers. If anyone has any thoughts on this I would appreciate it, Thanks1!

Do you have a photo of the switch? The only issue I have found with Carling switches is availablity from other then a dealer. Wesgrade carries them but they have a $50 minimum purchase.

jwmiller
09-12-2011, 02:31 PM
Try this out


http://www.waterskis.com/MasterCraft-Toggle-Switch-2-Position-p/mastercraft_rocker_switch_601.htm

agarabaghi
09-12-2011, 02:31 PM
www.waterskis.com

http://www.waterskis.com/MasterCraft-Toggle-Switch-2-Position-p/mastercraft_rocker_switch_601.htm

might have to browse around as i have no clue what you are looking for.

NoWake197
09-12-2011, 04:40 PM
I can try to post a picture of the switch later tonight. The wes-garde sight looks like they may have what I need.

Lars
09-12-2011, 10:07 PM
I also have an '04, I think this is what you want:

http://www.waterskis.com/MasterCraft-Toggle-Switch-Red-LED-2-Position-3-p/mastercraft_toggle_rd_262.htm

Tomi
09-13-2011, 02:01 AM
And here is a link to lots of parts including the switch covers:
http://www.charlotteskiboats.com/mastercraft_parts.cfm?category=Instrumentation&CurrentPage=4

-Tomi

Table Rocker
09-13-2011, 07:39 AM
You might also be able to keep your original covers and put them on the replacement switches.

jwroblew
09-13-2011, 10:48 AM
Here (http://www.mouser.com/catalog/629/1346.pdf) is were I got mine when I put heated seats in, the covers wont have the labeling though, but there an exact match, you can reuse the old covers.