PDA

View Full Version : Rear dain plug on an 2006 X1


agarabaghi
09-12-2011, 10:14 AM
Can someone send me a picture of the rear drain plug on an X1...

Id like to see how many screw holes are used on the mastercraft one.

agarabaghi
09-12-2011, 10:24 AM
Seems like the mastercraft ones are slightly larger than the standard 1/2 npt threaded garboard plug.

I can purchase a 1/2" NPT plug from west marine for pretty cheap, but it only has 3 screw holes, while the mastercraft has 4.

does anyone know where to get a garboard plug / plate with 4 holes that is 1/2 npt?

davidstan
09-12-2011, 02:33 PM
Try Rambo Marine in AL.

agarabaghi
09-12-2011, 05:58 PM
Can someone take a picture of their drain plug the plug out and a measuring tape or ruler measuring the outer and inner diameters?

I need to send the dimensions to the guys over at liquid lite so they can figure out what size i need.

Moosecrackers
09-12-2011, 06:17 PM
Can someone take a picture of their drain plug the plug out and a measuring tape or ruler measuring the outer and inner diameters?

I need to send the dimensions to the guys over at liquid lite so they can figure out what size i need.

Sorry about the bad quality - holding the camera with one hand and the ornamental grass/swatting mosquitoes with the other...

Hope this helps. This is my 2004 MariStar 210.

agarabaghi
09-13-2011, 10:30 AM
Perfect thank you!

agarabaghi
09-13-2011, 10:35 AM
according to the dealer "The rear drain plug is 1” on the 1989-2007 boats. "

I wonder what size newer boats are? Anyone know?