PDA

View Full Version : transmission cooler mounts


tommcat
09-07-2011, 12:30 PM
the previous owner had the motor replaced in my 97 prostar LT1 and the marina never mounted the transmission cooler to anything, it's just zip tied to some other stuff. does anyone have a close up pic of the mounting location and bracket? i'd like to mount it correctly

tommcat
09-10-2011, 04:04 PM
anybody, nobody?

JLeuck64
09-10-2011, 04:07 PM
Hang on...

Here's one, I go take another of the bracket for ya! I changed one of the fittings to relocate the hydraulic line farther away from the exhaust manifold.

JLeuck64
09-10-2011, 04:23 PM
The bracket is made from three pieces. Looks like 1/4" plate was used as an extension from the block. Then two pieces of thinner sheet metal was formed to wrap around the cooler like a clam shell.

tommcat
09-10-2011, 04:49 PM
perfect, thanks a bunch! looks pretty simple, i'll just make some on my own.

thanks again

thatsmrmastercraft
09-10-2011, 04:55 PM
Yet another thing to add to my To Do List.