PDA

View Full Version : 97 prostar seat mounting?


tommcat
09-07-2011, 12:28 PM
i have a 97 prostar 205, apparently the previous owner did something strange with the drivers seat mounting as it just has about 10 drywall screws holding it down to the black base. does anyone have some pics of how this is supposed to be mounted? is it supposed to have adjustable tracks?

tommcat
09-07-2011, 03:27 PM
thanks for moving this mods, it definitely is better here in the general forum than it was over in the general forum.

Table Rocker
09-07-2011, 04:37 PM
My driver's seat had a large sheet metal screw (probably #12 X 1.5") with a washer at each end of the seat slide. Four screws in total.

tommcat
09-07-2011, 04:51 PM
My driver's seat had a large sheet metal screw (probably #12 X 1.5") with a washer at each end of the seat slide. Four screws in total.so there are definitely supposed to be adjustable slide/tracks? i dont have any

Table Rocker
09-07-2011, 05:14 PM
They look like this:http://www.rifenboats.com.au/wp-content/uploads/wpsc/product_images/P182106z.jpg Your MasterCraft dealer should be able to help you out.

tommcat
09-07-2011, 05:42 PM
thank you VERY much

tommcat
09-07-2011, 05:42 PM
now on that note, has anyone switched to a different drivers seat, one with a bolster maybe?