PDA

View Full Version : Gouge in Hull Repair


TX_MC
08-05-2011, 10:00 PM
I don't know what I hit but after pulling off the water I spotted this gouge. The picture quality is poor but it is approx quarter size that goes down to the fiberglass (doesn't appear to be too deep into the fiberglass though).

I am wondering if marine tex or some other repair method would be sufficient to prevent further issues or if I should bite the bullet and have it professional repaired.

Thanks for the help! I've learned a lot from this board and you've likely saved my family from crappy weekends with all the maintenance guidance.

SKADMAN
08-06-2011, 12:25 AM
http://www.mastercraft.com/teamtalk/showthread.php?t=37310