PDA

View Full Version : Need fuel pump!


Brian B
07-08-2011, 02:38 PM
330hp LTR Indmar......

Mastercraft of AZ want $450ish! :rolleyes:

ntidsl
07-08-2011, 02:42 PM
build one...you know where to find the info.

BoulderX45
07-08-2011, 03:22 PM
330hp LTR Indmar......

Mastercraft of AZ want $450ish! :rolleyes:

That is cheap! Mastercraft Seattle wanted something around $600 when I needed mine. I got one in Montana for $475:)

Jerseydave
07-08-2011, 03:26 PM
You could build one as stated before, but I chose to get the whole module for mine. Hopefully I will get at least another 300+ hours out of the new one. If you do decide to build one, don't forget to replace your fuel filter. (should be done every 2 years)

Are you sure you need a fuel pump? Is yours original?

Jim@BAWS
07-08-2011, 03:36 PM
Approx $430 + shipping

Jim@BAWS

(813) 996 2297

Ask for Chuck

krutzmart
07-08-2011, 03:36 PM
Just put one in weds. night. 85.00 from autozone AIRTEX E2044 85.00,
Almost bought the 500.00 part

Works like a CHAMP

krutzmart
07-08-2011, 03:38 PM
BRIAN

Check this out

http://www.mastercraft.com/teamtalk/showthread.php?t=24965

BallBushing
07-09-2011, 07:13 AM
Jim looks to have the best price. Make sure you have the correct part number, get it off the sticker on the existing pump, get a new gasket too. Just replaced my fuel assembly unit on the same engine, very easy. Plan to rebuild the old one & have a spare. Make sure you have the special tool to remove the fuel line, $10 at NAPA Auto.

If you're a bit mechanically inclined just buy the pump itself and replace the old one, lots of info here on how to do it.

Brian B
07-09-2011, 11:29 AM
BRIAN

Check this out

http://www.mastercraft.com/teamtalk/showthread.php?t=24965



Thank you! I'm on it! Should be fairly easy......

Brian B
07-09-2011, 11:30 AM
If you're a bit mechanically inclined just buy the pump itself and replace the old one, lots of info here on how to do it.

Thanks. Shouldnt be a problem!