PDA

View Full Version : What do you have in your toolbox?


Tuna Cowboy
06-30-2011, 01:03 PM
Looking to build up a little tool box to keep on the boat for anything that may pop up along the way.....no need to haul around any useless junk either...what do you guys keep in your tool box??

stuartmcnair
06-30-2011, 01:09 PM
I probably have the least in mine...

3/8" nut driver for the hose clamps
a few feet of tinned marine wire
strippers and crimpers and waterproof connectors
spare impeller and paint can openers to pull them
screwdrivers

milehigh970
06-30-2011, 01:21 PM
I have..
- a spare impellar, the wrench (1/2 in) and socket (11mm) I need to change it.
- a high quality (snap on) adjustable wrench
- a Phillips and Standard screwdriver
- a bag of zip ties
I used to carry more but it always seemed I never used it and became the guy helping some poor guy fix something because he had no tools or clue..lol

pmkkdx
06-30-2011, 01:25 PM
flat blade, phillips blade, small crescent wrench, pair of pliers, roll elec. tape, few zip ties, couple of zip lock bags, set of jumper cables, pocket knife. usually have a spare impellor (but think I used it and need to get a new one to have onboard as a spare)

agarabaghi
06-30-2011, 01:39 PM
- flat head screw drive
- philips head screw drive
- large vice grip
- small vice crip
- wire strippers
- wire cutters
- knife
- wire
- electrical type
- socket / wrench kit
- sledge hammer
- adjustable crescent wrench
- 12v electric drill
- drill bits
- wire connectors
- battery terminals
- zip ties

east tx skier
06-30-2011, 02:03 PM
Check this out. Must be a huge toolbox.

Link (http://mastercraft.com/teamtalk/showpost.php?p=114179&postcount=22)

chawk610
06-30-2011, 02:16 PM
I keep too much in mine... extra wire for jumpers... full set of wrenched, extra belts, fuses, impellar, volt test light, quart of oil, elect. tape, velcro, a mallet, asst. screwdrivers, etc...

Tuna Cowboy
06-30-2011, 02:34 PM
Awesome! Thanks guys!

rspiecha
06-30-2011, 02:55 PM
Cash!!!! Provide motivation to drag my posterior all the way back to the boat ramp :)

Rob

oxberger
06-30-2011, 03:12 PM
Check this out. Must be a huge toolbox.

Link (http://mastercraft.com/teamtalk/showpost.php?p=114179&postcount=22)

I bet he makes a great wake for boarding! Curiuos though, how do you clean the speedo pick ups with a can opener and what kind of can opener?

Iskidaily
06-30-2011, 05:13 PM
multi - tool, Allen wrenches for tower, duct tape, extra rope for towing, cash for gas or emergency margarita and finally a mobile phone to call the house so someone can get us with the other boat.

onejdgreen
07-01-2011, 04:19 PM
I've got a couple thousand dollars worth of tools in the truck, along with the spare prop, impellar and few other parts. Figure I can get a tow back to the truck to do any repairs, if needed. KNOCK ON WOOD!

psychobilly
07-01-2011, 04:42 PM
Check this out. Must be a huge toolbox.

Link (http://mastercraft.com/teamtalk/showpost.php?p=114179&postcount=22)

who needs ballast bags when you carry all of this stuff! :D

Chief
07-01-2011, 05:55 PM
Spare fuel pump!

Bobwire
07-01-2011, 07:31 PM
A couple things not mentioned that I carry in my box are a Tire plug kit and 5 minute epoxy.

SPSinclair 190
07-01-2011, 08:15 PM
Not a thing I own a MASTERCRAFT !Just lucky so far I guess

nmcjr
07-01-2011, 09:08 PM
I went to Sears and bought a new ~250 pice toolset and then just took all my old ones and put them in the carrying case it came with and put that in the boat. That way it refreshed my home set and gave me more than I needed for the boat. They also have very reasonable ~100 piece sets that come in a nice storage case.

babymoore3
07-03-2011, 08:51 AM
How about two paint can openers to pull the impeller? Haven't seen anyone mention that yet...

The8Ball
07-03-2011, 09:07 AM
I also have a toolbox... but chances are... even if you pack it full of everything you think you could possibly need... you'll break down, and not have the right tool.

So I also have paddles in my boat.