PDA

View Full Version : skiboatcovers.com pictures?


agarabaghi
06-28-2011, 11:20 AM
Does anyone have a picture of their sunbrella cover from skiboatcovers.com Id like to see how the normal fit looks.

Also how is it tightened down below the rubrail ?

THanks!

xbot50000
06-28-2011, 11:35 AM
Can't wait to see the answer to this one. Is the search function broken?

nickespi
06-28-2011, 03:37 PM
I can get a pic for you this afternoon.

agarabaghi
06-28-2011, 03:46 PM
thanks, what fit do you have?

BrianM
06-28-2011, 05:42 PM
Don't know what you mean by normal fit. Here is a picture of my waterline cover from them. There was a cinch cord at the bottom if it was not waterline that cinch cord would be just below the rub rail which you can have them make exit/tighten from the rear or the side if you prefer.

agarabaghi
06-28-2011, 05:51 PM
i guess the normal fit, which is not the waterline fit can be used on a boat that is not on a trailer. The guy said it resembles the oem cover, just with out the ratchets...I hope my cover does not loook like that lol ...

sand2snow22
06-28-2011, 06:18 PM
echo, echo, bravo,

http://www.mastercraft.com/teamtalk/showthread.php?t=21213&highlight=waterline+boat+cover

agarabaghi
06-28-2011, 06:27 PM
echo, echo, bravo,

http://www.mastercraft.com/teamtalk/showthread.php?t=21213&highlight=waterline+boat+cover

Was there a point to that thread? I did not see a single cover matching the description. Im looking for the normal fit (not water line, not covering the platform, not covering the tower) and having the ability to be pulled tight right at the rub rail line. From talking to the guy on the phone it seems that the normal fit is exactly what i need, but I would like to see pictures of it...

sand2snow22
06-28-2011, 06:40 PM
Look at the first 5 pictures on top. Looks like bungees to me.....to the trailer. If you had a different way of securing it, might want to ask them.

http://www.skiBoatCovers.com/index.html

agarabaghi
06-28-2011, 06:56 PM
nah, guy said the cover should be able to bit fitted below the rub rail and tightened while not on a trailer. So this is why im asking for pictures of the normal fit in water.

nickespi
06-28-2011, 07:40 PM
Here is what the cover looks like on my 02 X-30. It looks loose in the pics, but is very taut. No water pools on the cover. It runs right off the side. It has loops around the edge that you can tie together under the hull. I wouldn't use bungees personally, but I gues it's an option. I use nylon cordage that doesn't scuff the gel. I did notice that water would pool around the rear bench seat, on either side of the support pole, until I tied the loops on the side of the cover to the tie down location on the fender. Hopefully you can see it in the picture and I'm not confusing you. If you have any other questions, just shoot me a message.

http://i51.photobucket.com/albums/f396/nickespi/1309300205.jpg
http://i51.photobucket.com/albums/f396/nickespi/1309300203.jpg
http://i51.photobucket.com/albums/f396/nickespi/1309300207.jpg

agarabaghi
06-28-2011, 07:50 PM
Thats the waterline fit right?

BrianM
06-28-2011, 08:20 PM
Pics are both of waterline. Go to www.skiboatcovers.com (http://www.skiboatcovers.com) and look at the photos there. Lots of pics of the normal (to the rub rail) cover on various different boats there. When you click on Mastercraft at the top the next page shows all MCs at the top with normal fit covers.

agarabaghi
06-28-2011, 08:21 PM
none i the water unless im missing something

BrianM
06-28-2011, 08:25 PM
The cover will fit the same in the water or on the trailer.

nickespi
06-28-2011, 09:28 PM
Sorry, didn't read that you didn't want a full length cover. Do you keep this boat in the water all the time?

agarabaghi
06-28-2011, 11:20 PM
yea pretty much. Pull it out every 2 weeks to compound and wax.

JeromeM
06-29-2011, 01:15 AM
http://www.theprocover.com/

bjw444
06-29-2011, 02:30 AM
I'll post some tomorrow I just received mine exactly how u want yours. Very pleased and waterproof, high quality, def not cheap but def nice

hragsarkissian
06-29-2011, 02:34 AM
looking for a cover for my X25. It's always kept in the water. anyone know of a good option? something waterproof perhaps? What about separate ones (one for the bow, and one for the rest).

agarabaghi
06-29-2011, 08:30 AM
I'll post some tomorrow I just received mine exactly how u want yours. Very pleased and waterproof, high quality, def not cheap but def nice

Please do. Thanks!

Which material did you go with? Color? Options? Could you snap some pictures of how it tightens around the rub rail?

hragsarkissian
06-30-2011, 06:52 AM
anybody know what SWPF means? Description says X25 Cover W/O SWPF

mseller
06-30-2011, 09:50 AM
totally guessing here...but is that where they include spf protection in the cover? so therefore that would be without?

hragsarkissian
06-30-2011, 10:03 AM
hmm i was thinking something of the likes as well...

TRBenj
06-30-2011, 10:03 AM
I would guess that SWPF = swim platform.

mseller
06-30-2011, 10:11 AM
that is probably it...i guess it's too early for me :o