PDA

View Full Version : Who's working on old mastercraft ABS plastic


kraig1995
06-21-2011, 06:28 PM
Trying to put together the Dash shroud on my 95 prostar. I have 28 cracks or breaks in the shroud. Anyone have any advice? I typically would reinforce it with fiberglass, but fiberglass doesnt stick to Plastic.

tph
06-22-2011, 03:21 AM
I used ABS cement on my '89 dash and I think it worked fairly well. I also back braced with aluminum bars across the switch panel areas that were sagging.

dade61782
07-06-2011, 04:20 PM
I used epoxy and glass cloth on my 92 ps gauge cluster. All the mounting holes were cracked and between a few of the guages were busted reinforced the front and back. The epoxy (west system) stuck to the plastic fine.

jconover
07-06-2011, 04:43 PM
I also successfully used west system mid-cure epoxy resin with a filler material to reinforce the back of my dash, as there were several cracks in it