View Full Version : Morse MV2 Control Throttle sticking

06-15-2011, 03:48 PM
My MV2 control assembly in my 1989 Tristar 190 gets stuck if I take it all that way down (full throttle) and the transmission will disengage. The only way to get unstuck is to drop the control and push the shifter arm on the back side of the control back. Ideally if it is stuck in full throttle then it should already be all the way, but when it sticks it can be pushed back just a tad. Its almost like it "clicks." Then the throttle releases and it can come back to neutral.

Of course the boat is out of commission until I can get this fixed. I fact I have the cables disconnected and the control assembly is in my garage. It stills gets stuck with the cables disconnected so I don't think it is a cable issue. I have taken the control assembly apart and didn't find anything that appeared to be broken.

Does anybody have any ideas?

03-09-2017, 03:10 PM
Did you ever get this sorted? Mine has similar problems, and its gets stuck at full throttle in gear. Kinda dangerous!