PDA

View Full Version : Recommended Coil for me please....


03geetee
06-12-2011, 09:07 PM
83 PCM 351 with electronic ignition. What is my best option for an internally resisted coil that wont get so damn hot as my stocker?

Im all ears!

JTR

thatsmrmastercraft
06-12-2011, 09:25 PM
Jconover posted this in his 88 Prostar Teardown thread:

Mallory Promaster eCoil - Part #30451. It's a 1.4 ohm coil, basically it is internally ballasted and oil-free. It has a big heatsink to keep it cool. I havent busted one apart to see if there is anything solid state inside. Talked with Mallory about my ongoing coil overheat problems, they suggested this (go figure). I'll let you know how it works out.

http://www.jegs.com/i/Mallory/650/30451/10002/-1?parentProductId=1399864

03geetee
06-12-2011, 09:29 PM
Jconover posted this in his 88 Prostar Teardown thread:

Mallory Promaster eCoil - Part #30451. It's a 1.4 ohm coil, basically it is internally ballasted and oil-free. It has a big heatsink to keep it cool. I havent busted one apart to see if there is anything solid state inside. Talked with Mallory about my ongoing coil overheat problems, they suggested this (go figure). I'll let you know how it works out.

http://www.jegs.com/i/Mallory/650/30451/10002/-1?parentProductId=1399864

I saw that but the mounting presents a little problem no?

JTR

thatsmrmastercraft
06-12-2011, 09:31 PM
I saw that but the mounting presents a little problem no?

JTR

Sounds like more of a project than a problem.

03geetee
06-12-2011, 11:07 PM
Sounds like more of a project than a problem.

Indeed.

JTR