PDA

View Full Version : New prop for 1994 PS190


baseman422
06-09-2011, 02:27 PM
Hey everybody, we have a 1994 PS190 and last night we "re-shapped" our prop putting her back on the trailer. This was a horrible experience and a valuable lesson at the same time.

what prop would be sugested to replace it. it was factory as ar as I know. Pulled great, topped out at 40mph. We ski, wakeboard, and tube. If anyine has one for sale or even know what I should buy that would be great!!

We also need a part for our trailer. We need an arm that has to winch and roller the boat noses up to. I have to find one of those too.

Any help or direction is greatly appreciated!!

baseman422
06-09-2011, 02:29 PM
Here is nother pic of the front of the trailer.

DooSPX
06-09-2011, 03:25 PM
Look in Overtons or something for a winch/stand/bow stop. That is not a MasterCraft trailer.
anyway, about the prop, if you were happy with the performance of the prop, just send it to Eric at OJ Props or talk to them about a new custom prop for you.

flipper
06-09-2011, 03:28 PM
Do you have the powerslot or 1:1 tranny?

flipper
06-09-2011, 03:28 PM
Hey everybody, we have a 1994 PS190 and last night we "re-shapped" our prop putting her back on the trailer. This was a horrible experience and a valuable lesson at the same time.

what prop would be sugested to replace it. it was factory as ar as I know. Pulled great, topped out at 40mph. We ski, wakeboard, and tube. If anyine has one for sale or even know what I should buy that would be great!!

We also need a part for our trailer. We need an arm that has to winch and roller the boat noses up to. I have to find one of those too.

Any help or direction is greatly appreciated!!
For the trailer, take it to a fab shop. It's not hard to make one at all.

baseman422
06-09-2011, 04:29 PM
Do you have the powerslot or 1:1 tranny?

We have the velvet drive 1:1

EJ OJPROP
06-09-2011, 04:32 PM
I would suggest the 13 X 13 LC 1" 4-blade. I may be able to repair the damaged one as well. Feel free to give me a call.

DooSPX
06-09-2011, 04:35 PM
I would suggest the 13 X 13 LC 1" 4-blade. I may be able to repair the damaged one as well. Feel free to give me a call.

There you go Baseman, right from the man!

DooSPX
06-09-2011, 06:17 PM
Also, FYI, OJ makes the factory props on all MC's

east tx skier
06-09-2011, 08:29 PM
Similar hull.

www.tylerskiclub.com/proptest.pdf

SS LS1
06-09-2011, 10:50 PM
Wow, that trailer looks scary with no lower bow roller and the wheels are so far back there must be lots of tongue weight. How does it pull down the road? Does it sag your tow vehicle? That trailer looks like it would be used on an IO or V drive rather than a direct drive boat.

Jeff Lyman
06-11-2011, 10:14 PM
I have a stock prop off my 93 ps205 without the power slot but with the 285 hp engine, cheap. I'm sick of moving it around. PM me with your offer.