PDA

View Full Version : perfect pass settings 2011 x2


mastercraft210
05-01-2011, 01:34 PM
I tried the new 2011 x2 with the 5.7 ilmor this weekend.Normally i have no problems to adjust the perfect pass but with the ilmor i can't find the wright settings.It accellerates in a corner to fast and with the perfect pass set on 36km it goes over 41 km when the boat is out of the corner.It needs 200 m to get the right spead again.
What settings do you guys run for the x 2 with some extra ballast.

bjames
08-01-2011, 03:34 AM
Im having the same problem on my 2011 X25. I found if the PP is set to 'Speed' setting, it is completly inacurrate. If I set speed to 10mph, the boat accellerates to 13 then settles down to 8 - 9 mph. I found that if you set the PP to RPM mode, it is much more accurate.

I have this issue on the list of Warranty items. IMO paying 100K for a championship tow boat I would expect better accuracy out of the cruise control.

CantRepeat
08-01-2011, 08:10 AM
Have you guys gotten in touch with PP tech support?

techsupport@perfectpass.com