PDA

View Full Version : Driver remote


agarabaghi
04-28-2011, 04:35 PM
So i have the clarion remote and found the big black wire was ripped so i replaced it but the remote still does not work.

What are those 2 smaller wires, im guessing power? So i should be able to put the meter to them with the boat on and see if it is getting power right?

rspiecha
04-28-2011, 05:16 PM
The two wires I think are for lighting. One ground and one to the lighting circuit of the boat.

Which remote is it???? The oval one from around 2003???


Rob

agarabaghi
04-28-2011, 08:38 PM
the oval from 2006.

This is the model, i tried to follow the 2 wires back but lost them some where in the gunnels... I followed them all the way back to the locker on the X1, and then they seem to go back up to front. Im not sure where they end...

http://www.clarion.com/us/en/products/2006/marine/remotes/CMRC2-BSS/us-en-product-pf_1134643389314.html

I dont get what you mean for lighting? There is no LCD or lights on this key pad i dont think... There are 2 wires (1 black / 1 grey) and then the clarion plug.

http://www.clarion.com/us/en/products/2006/marine/remotes/CMRC2-BSS/us-en-product-pf_1134643389314.html

agarabaghi
04-29-2011, 08:19 AM
no one has removed or installed their driver radio remote???

agarabaghi
04-29-2011, 08:41 AM
i guess you are right, it does have something to do with lights... i think my remote is dead and my headunit is 1/2 broken as none of the knobs work.