View Full Version : Removing tower speakers
03-28-2011, 12:55 PM
Hello, On our 2008 X-2 the tower speakers were factory mounted in the center two positions. This year I would like to move the speakers to the outer two positons. Before I damage my speaker or housing/can trying to remove these, does anyone know the proper way to remove these? I had taken the grill cover off of the speakers thinking the speaker needs to be removed, however, the speaker didn't want to budge. Did not want to pry on anything until I know more.
03-29-2011, 09:56 AM
The speaker will pry out without too much effort, jsut the gasket stuck to the can. Then you can undo the bolt inside and move them.
03-29-2011, 09:53 PM
Thanks Thrall! This is what I thought but it is reassuring going into this knowing it should budge with a little effort. Enjoy the boating season.
04-01-2011, 03:19 PM
Yeah, you too!
FWIW, removing the tweeters is not as easy. There's a procedure posted in teh electrical section I think that I started last year when I thought I had to remove the tweeters when I was adding tower speakers.