PDA

View Full Version : Mastercraft BIG (Boat Information Guage) Rider Setup question


GoneBoatN
03-19-2011, 08:37 PM
Anyone know if the rider image can be changed on the Rider Setup?

I've downloaded the manual and I looked at the riders.txt file but they don't say if/how the rider image can be changed.

Or
03-20-2011, 07:50 AM
i think there is a way
you need to put in your thumb drive the pictures and name them rider01, rider02 etc. than import tham to the big... a dealer should explain it better

ShawnB
03-20-2011, 11:52 AM
This is how it was explained to me: You put a jpg image on your flash drive and then in the "Image" section of riders.txt you put the name of that image (minus the .jpg).

I have yet to try it though so let us know how it works :)



[START_OF_RIDER]
NAME=WAKE FULL
IMAGE=RIDER02
CRUISE_MODE=2
CRUISE_SET_POINT=3540
CRUISE_KDW=50
BALLAST_CELL_1=100
BALLAST_CELL_2=100
BALLAST_CELL_3=100
BALLAST_CELL_4=100
TRIM_1=0
TRIM_2=0
TRIM_3=0
USER_DEFINED_1=0
USER_DEFINED_2=0
USER_DEFINED_3=0
USER_DEFINED_4=0
[END_OF_RIDER]