PDA

View Full Version : Clarion CMD4 Error 6


shaneflood
03-09-2011, 12:17 PM
I am getting an error 6 while trying to play CDs in my Clarion CMD-4. Radio is still OK and aux input works fine so I can still work an iPod through it, but it a nuisance not being able to play CDs.

Has anyone else encountered this problem and if so was it reparable? Scouring the web it seems that the error is because the unit thinks the CD is in upside down (I have tried CDs both ways).

TX.X-30 fan
03-09-2011, 12:35 PM
Clarion sucks...............

CantRepeat
03-09-2011, 12:51 PM
A search of the Clarion website.


ERROR CODES - WHAT DO THEY MEAN?
A3
Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.
Error 8.Tape Drive system defective. Eating tape or something wrong with the drive system.
Error 9.Weak RF. Try alternate frequency
NO CD.CD error message. No CD is magazine or no magazine in CD Changer.

CantRepeat
03-09-2011, 12:53 PM
There is a suggestion that the lens might be dirty and needs to cleaned as well.

shaneflood
03-09-2011, 01:34 PM
Thanks, will try a lens cleaner and maybe some compressed air.