PDA

View Full Version : Where do you find one of these????


prostar205
01-24-2011, 07:51 PM
Anyone every seen one of these? If so, where do you get one? I'm talking about the single gauge cluster just in front of the throttle. I was thinking it would be a great place to put the trim tab position gauge when I put my new trim tab on in the next couple of weeks.

Also, does anyone know if Medallion made the 2005-2007 Trim Tab Position guage? I would like to find one of those also.

atlfootr
01-24-2011, 08:09 PM
Try the guys @ RAMBO MARINE
Ask for Lex in Parts Dept!

http://www.rambomarine.com/images/stories/350x263xLexPearson.jpg.pagespeed.ic.ykyeSTQKLS.jpg (http://www.rambomarine.com/)

RAMBO MARINE
http://www.rambomarine.com/

HUNTSVILLE LOCATION:
15904 Hwy. 231 N.
Hazel Green, AL 35750

(256)-828-3590 Phone
(256)-828-7666 Fax

prostar205
01-26-2011, 05:00 PM
Here's a closer picture of what I'm looking for. I talked to Lex at Rambo Marine (thanks altfootr for setting that up) but he's could find anything. I'm starting the think that someone too a single A-Piller gauge pod and cut it into the throttle lever side panel and then painted it to match the OEM color. If so, that is very cool mod and something I may try. It is a perfect place to install the trim tab position gauge.

CantRepeat
01-26-2011, 05:17 PM
Try the guys @ RAMBO MARINE
Ask for Lex in Parts Dept!

http://www.rambomarine.com/images/stories/350x263xLexPearson.jpg.pagespeed.ic.ykyeSTQKLS.jpg (http://www.rambomarine.com/)

RAMBO MARINE
http://www.rambomarine.com/

HUNTSVILLE LOCATION:
15904 Hwy. 231 N.
Hazel Green, AL 35750

(256)-828-3590 Phone
(256)-828-7666 Fax

That guy has been my hero many times!

east tx skier
01-26-2011, 06:22 PM
You could use something like this (http://www.danamarineproducts.com/GaugePods.htm) mounted to a backer board that you could upholster and attach.

I went through a similar hunt trying to find something that looked like the speaker pod enclosures that came molded into the throttle panel of the SNs in the early 2000s. I found the OEM stuff, but it wouldn't fit my boat. So I ended up custom fabbing a speaker enclosure and mounting it to the inside of the hull under the throttle. Came out great. Doesn't look identical to OEM, but in some ways, it is better.

Here are some other options from Summit Racing (http://www.summitracing.com/search/?keyword=gauge%20pod&dds=1). Try Jegs (http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&Ntk=all&Jnar=0&Ne=1%2B2%2B3%2B13%2B1147708&searchTerm=gauge+pod) as well.

CantRepeat
01-26-2011, 08:18 PM
So I ended up custom fabbing a speaker enclosure and mounting it to the inside of the hull under the throttle.

Eastie,

That has always been my fall-back. If I can find it for a good price I'll push my cash into the system. If I can't then I'll make it. I've learned to do carbon fiber, stainless steel (did this for a while before I owned boats), fiber glass, you name it I'll try my hand at it.

Retirement is good, some times boring but never dull.