PDA

View Full Version : acme prop??


DURANGO 95
09-10-2010, 12:28 AM
hi!!
i m juan from Argentina
i have prostar 94 repower with gm 5.7 290 hp 1:1 trans.
have a acme prop 911 13x10.5 and i need change for other all around prop.
acme recomended to me 653 or 515??

i need to know the speed and rpm with this props?? at 22 mph 36mph and top speed end?? or any test with this props??
thanks, and sorry for my bad languages.

east tx skier
09-10-2010, 10:55 AM
At what altitude are you running your boat?

DURANGO 95
09-11-2010, 11:06 AM
Hi!!
Run To Sea Level, No Elevation.

daverbeck
09-11-2010, 01:59 PM
I have a '94 PS205 with a stock 275 hp engine and 1:1 trans. Running an ACME 541 the RPM at 34 mph ~ 3200.

I don't board or foot so I can't tell you about the higher / lower speed RPM's.

jason@wakemakers.com
09-16-2010, 03:29 PM
Since you're interested in WOT RPM I'm assuming you want to maximize speed as much as possible. Given that, I would look at the ACME 525 (http://www.wakeprops.com/acme-525-propeller.html), it's got a little more cup than the 653, so it will be 2-3 MPH faster everything else being equal.

EJ OJPROP
09-16-2010, 03:44 PM
OJ makes a 13 X 13 LC 1 1/8" FORCE 4-blade and a 13 X 11.5 LC 1 1/8" XMP 3-blade that would run well.