PDA

View Full Version : Replacement Hose 2007 x-45


MorganMac
09-01-2010, 05:02 PM
Hoping someone can confirm for me that the hose pictured at the very bottom (thanks to TMCNo1) is the same as the one in the picture below (excuse the duct tape/it didn't work).

Engine Picture for Reference
http://www.mmacdonald.net/enginepic.JPG


Hose Picture (middle top, it runs from bottom of engine to top of engine, contained HOT! water)
http://www.mmacdonald.net/hosepic.JPG


Replacement:
http://www.skidim.com/images/r045048.jpg
http://www.skidim.com/prodinfo.asp?number=R045048

(Ordering online from a MasterCraft dealer would be okay too.)

**Incase anyone wanted the back story. Family was out houseboating on Shasta lake last week. First day out notice bilge shooting water out. Great what the hell. Open engine compartment see hose split down the side water shooting out. Luckily went to marina and they have a Napa parts affiliate (Broken Rudder I believe was the name of the shop) who had a flexible radiator hose I was able to use as a work around. Although not flexible enough to be a permanent replacement, as i will need the formed/fitted hose to allow for proper water flow. And yes, I tried duct tape to fix the split in the hose before going to get the replacement hose.**

ttu
09-01-2010, 05:13 PM
there was a recall on that "J" cooling hose. mine went out with about 15 hours on the boat. sucker pumps a lot of water.

ttu
09-01-2010, 05:15 PM
here is a link

http://www.mastercraft.com/teamtalk/showthread.php?t=17164

MorganMac
09-01-2010, 06:22 PM
Thank you ttu. I've contacted my dealer to see if they will replace and send to me under warranty.