View Full Version : Center pylon mount loose on 225VRS

08-11-2010, 01:42 PM
Pardon me if the terminology is not exactly right.

I have the pylon next to the driver on my 1994 Maristar 225VRS. It is snugly attached with the u-bolt to the main mounting plate, but the two bolts on that plate that pass through the stringer continue to loosen. Further tightening of the bolts seems to just drive them deeper into glass with no support. Is there anything solid in there, where maybe a couple fender washers will help, or do I need to do something more drastic? Thanks.

08-25-2010, 11:02 PM
Finally got to talk to the local service manager, says there is nothing but glass there, so an additional plate is in order. Just in case anyone is interested.