PDA

View Full Version : "Ten Foot Pole" Rigging???


mitchela
08-22-2004, 03:14 AM
I have a "Ten Foot Pole" with a incomplete set of rigging. PLEASE respond if you can describe or send a picture of the proper rigging for the "Ten Foot Pole".

THANKS,

Al Mitchell
Vero Beach, FL

JimN
08-22-2004, 09:48 AM
Is it a real one or a home-made? If it's like a Fly-High Extended Pylon by Barefoot International, you could call them to get a diagram and any parts that are missing. Otherwise, their diagram should help you. The cables are 1/4" stainless, but the aluminum blocks are made for them. There's a lot of tension on these cables when towing, so don't skimp on them.

After looking at the BI site, they don't show the extended pylon, but may still be able to help on the hardware.

MarkP
08-22-2004, 04:00 PM
Mitch I posted the directions for the “Fat Pole”, http://www.tmcowners.com/teamtalk/showthread.php?t=367 it may help?? If its to different you may try to contact the Co. that makes the “ten foot pole”. Hope this helps..

Have fun